







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Roofing: The Huntington Beach Owner’s Guide
We install and service Unilock-compatible roofing components in Huntington Beach, and most single failed roof parts land between $400 and $1,800 installed for a repair, with full roof replacement running $8,000 to $20,000. The parts themselves are rarely the big number; labor and roof access usually are. Owners almost always discover the failure the same way: a brown water ring spreading across a ceiling board after a windy night, granules collecting in the gutter like dark sand, or a shingle tab lying in the flower bed after a Santa Ana wind event pushed through Huntington Beach.
It’s an uncomfortable thing to find, and most people spend a week hoping it’s a one-off. It usually isn’t.
Which Unilock Models This Applies To

Unilock is best known in Huntington Beach for hardscape, but the brand has carried roofing profiles over the years, and the parts you’ll be chasing are typically field shingles, ridge caps, starter strips, and ventilation components sized to those specific profile lines. The compatibility gotcha most homeowners miss: Unilock roof profiles aren’t interchangeable across production years. A 22-inch-wide profile from one run won’t lock into a 24-inch profile from another, and the locking tab geometry changed between series. If you match by color alone, you’ll buy the wrong piece and find out on the roof.
Here’s how to identify yours before you call anyone:
- Look for a stamp on the underside of a loose shingle tab, usually near the exposed edge.
- Measure the exposed height and the full width of one shingle course with a tape. Write both numbers down.
- Photograph the failure point with a ruler in frame.
- Note the approximate age from any prior inspection report or closing paperwork.
The OEM-vs-aftermarket call for Unilock is real. Genuine Unilock components cost more and match exactly; quality aftermarket equivalents can work when the profile is discontinued, and they’re often the only option once a series goes out of production. We’ll tell you plainly which is which for your Huntington Beach roof. We are an independent service provider and not affiliated with Unilock.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Roofing Is Failing
- Granules in the gutter and at downspout outlets. The mineral surface has worn through to the asphalt layer. Once granules are gone, UV exposure in Huntington Beach’s strong coastal sun breaks down the shingle fast, and the failure accelerates.
- Curling, clawing, or lifted corners. This is usually moisture trapped under the field course or failed sealant strips. On the marine-layer side of town, we see it most where attic venting is blocked and warm moist air condenses against the deck underside.
- Water staining on ceiling boards or attic rafters. By the time a stain shows up inside, water has been traveling along the sheathing for a while. The entry point is rarely directly above the stain.
- Missing, cracked, or displaced ridge caps. Ridge caps take the brunt of wind uplift. After a strong Santa Ana event, a cracked cap or an exposed ridge vent is one of the most common calls we get in Huntington Beach.
- Soft spots when you press the decking from inside the attic. Check this only from inside, standing on a joist. Soft decking means rot under the shingle, and a simple re-roof becomes a sheathing repair.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

| Work | Typical Installed Range |
|---|---|
| Localized roof repair (one area, matching part) | $400 – $1,800 |
| Tile roof repair (if your Unilock profile is tile-matched) | $600 – $2,500 |
| Full roof replacement, including parts and labor | $8,000 – $20,000 |
What moves you up the range: roof pitch and access, the number of layers already on the deck, whether the underlayment needs replacement while we’re in there, and how much of the field course has to come up to match your discontinued profile. Parts and labor are both written out on the estimate, line by line, so you can see what the shingle costs versus what the crew costs. Every price change arrives as a written change order before the work happens.
The completed work is backed by our 90-Day Done Right Promise, written on the contract, not buried in fine print. If something’s not right, one call brings us back.
DIY or Call Us?
What you can safely check yourself: from the ground with binoculars, look for lifted or missing tabs, granule loss, and staining on the fascia and soffit. From inside the attic, on a joist, look for stains and soft decking. Take photos. Measure the profile. That’s it.
Where DIY goes wrong on a roof: heights. A Huntington Beach roof is a fall hazard, and shingles don’t self-heal. Roofing is genuinely dangerous work, and we say so plainly. We don’t recommend homeowners get up there, especially for water intrusion you’d have to trace anyway. There’s also an information gap a homeowner can’t close: if the wrong tab gets blamed for a leak that’s actually coming from a vent boot or a flashing seam, you’ve just paid to replace the wrong part.
If you’d rather confirm the diagnosis before spending anything, call us at (844) 320-2945. We offer a Free Second Opinion on Any Written Estimate and No Trip Charge Inside the County. Our technicians have up to 28 years of experience, and a live person answers the phone around the clock. A background-checked crew member shows up on every visit.
FAQs

How long does Unilock roofing last in Huntington Beach? Most Unilock profile shingles hold up 20 to 30 years in this climate, but coastal sun and marine layer moisture shorten the upper end. Roofs on the inland side of Huntington Beach, away from the salt air, typically run two to four years longer than roofs a few blocks off the beach. Call (844) 320-2945 for a free inspection before you assume you’re at end of life.
Can it be repaired instead of replaced? Yes, most of the time. A single failed area, a cracked ridge cap, or a localized leak can usually be repaired rather than replaced, and the cost typically stays between $400 and $1,800. It’s only a replacement conversation when the failure is spread across the field course or the decking underneath is soft. Call (844) 320-2945 and we’ll tell you honestly which one you’re looking at.
How long does the swap take? A single-part repair runs a few hours; a larger repair covering more than one area runs most of a day. A full roof replacement depends on square footage and access, but you’ll have a written schedule before the crew shows up. Call (844) 320-2945 for a timeline on your specific roof.
How do you source the part? We work from the measurements and stamp photos you collect, and we match the profile and series first, color second. For discontinued Unilock profiles, we source a quality aftermarket equivalent that fits the same locking geometry. Every part is named on the written estimate before it’s ordered, so you can look up the brand yourself. Call (844) 320-2945 to get the part matched.
We also install and service KraftMaid, Cambria, and Silestone products in Huntington Beach kitchens and baths, so if your project has grown past the roof, one conversation covers it.
When you’re ready to know exactly what’s failing and what it will cost, call (844) 320-2945 to schedule your free estimate. Barrett & Sons Construction Huntington Beach pulls the permits, writes the scope and every price change on paper before we lift a shingle, and backs the finished work with the 90-Day Done Right Promise. Ask anyone on your street, or look up the license number yourself. $40 Off Any Repair Over $200 is available now, along with our permanent 10% Senior & Veteran discount.
Written by the team at Barrett & Sons Construction Huntington Beach, serving Huntington Beach and nearby areas.












