







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Oldcastle Kitchen Remodeling: The Huntington Beach Owner’s Guide
If you’re planning an Oldcastle kitchen remodeling project in Huntington Beach, you’re likely looking at a full kitchen remodel in the $14,000 – $45,000 range, with cabinet installation running $4,000 – $13,000 and countertops $2,000 – $6,500. The “part” in your kitchen that fails isn’t a single component but a system: cabinet boxes, drawer glides, hinges, countertop seams, and backsplash adhesion all age at different rates. Huntington Beach homeowners usually discover the problem slowly – a drawer that sticks, a hinge that squeaks, a countertop edge that lifts after a humid summer – and by the time they call us, the list has grown to five or six items that all point back to the original install.
We install Oldcastle-compatible kitchen components across Huntington Beach and the surrounding neighborhoods, and we do it with written scope, written allowances, and permits pulled where the job requires it. Call (844) 320-2945 for a free estimate – a live person answers 24/7.
Key Takeaways
- Oldcastle kitchen components are model-specific – matching the right series matters more than matching the brand name alone.
- Cabinet installation in Huntington Beach runs $4,000 – $13,000; countertops $2,000 – $6,500; full remodels $14,000 – $45,000.
- Barrett & Sons Construction Huntington Beach is an independent contractor, not affiliated with Oldcastle.
- Every eligible job includes permits pulled and inspections signed, plus our written 90-Day Done Right Promise.
Which Oldcastle Models This Applies To

Oldcastle’s kitchen lines split into distinct series, and the part that fits one won’t fit another. The two you’re most likely to encounter in a Huntington Beach home built between the late 1990s and the mid-2010s are the standard shaker-series cabinet boxes and the frameless European-style boxes used in later installations. The easiest way to identify yours: open a cabinet door and look at the hinge plate. Standard hinges mount to a face frame with two screws; European hinges mount to the box side with a circular 35mm cup bore. That single measurement – 35mm cup or surface-mount – tells you which replacement hinge family you need, and it’s the number one compatibility gotcha we see when a homeowner buys the wrong part online.
For countertops, Oldcastle’s engineered stone series runs in standard 2cm and 3cm thicknesses. If you’re replacing a single section, you must match the thickness and edge profile exactly, or the seam shows. Most Huntington Beach countertops we see in these kitchens are 3cm with a standard eased edge – but not all, and guessing wrong means a return.
On the OEM-versus-aftermarket question: for hinges and drawer glides, a quality aftermarket equivalent (Blum, Grass, or Hettich) usually outlasts the original Oldcastle hardware and costs less. For cabinet doors and countertop sections, stick with OEM or a matched replacement – the color and profile have to match the original run. We also handle KraftMaid, Cambria, and Silestone when your project crosses into those lines.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Oldcastle Kitchen Remodeling Is Failing
- Doors that sag or don’t close flush. The hinge screws have stripped out of the particleboard or MDF box side – common in Oldcastle frameless boxes after 10 – 15 years of daily use. The hinge itself is usually fine; the mounting hole is the problem.
- Drawers that stick or fall off the track. The glide has worn or the box side has swelled from moisture. Huntington Beach’s coastal humidity accelerates this, especially on cabinet runs near the sink or dishwasher.
- Countertop seams that darken or lift. The seam adhesive has failed, letting moisture in. In a beach-close climate, this shows up within a few years on older installs. Left alone, it stains the stone edge and can crack the slab.
- Backsplash tile that sounds hollow or pops loose. The thinset didn’t bond fully, or the substrate shifted. It starts as one loose tile and spreads along the grout line.
- Cabinet boxes that rack or lean. The install wasn’t shimmed and anchored to studs properly. You’ll notice doors that won’t stay adjusted no matter how many times you tighten them.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what kitchen work runs in Huntington Beach, installed, with the range reflecting size, material choice, and how much has to be torn out first:
| Scope | Installed Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range: cabinet box material (plywood versus particleboard), door style, countertop material and edge profile, and whether the layout changes. Every scope, every allowance, and every price change arrives as a written change order before work happens – no surprise invoices at the end. Every eligible job is backed by our written 90-Day Done Right Promise: if it’s not done right, we come back and make it right, one call.
DIY or Call Us?
Some things you can safely check yourself. Tighten a loose hinge screw with a wooden matchstick in the hole. Test a drawer glide by pulling it fully out and listening for grinding. Press on countertop seams to feel for movement. What you shouldn’t do: attempt to re-anchor a racked cabinet box to the wall yourself, or re-set a countertop section without knowing what’s under it. A cabinet box that lets go while you’re working under it is a genuine injury risk, and a poorly re-seated countertop can crack along the seam. Those jobs need the wall opened, the studs located, and the load transferred correctly – which is why we pull permits and have inspections signed on eligible work. The permit inspector works for you, not for us – that’s why we like him.
If you’ve got a list of failing items and you’re not sure what’s worth fixing versus replacing, call (844) 320-2945. We’ll give you a straight answer and a written estimate.
FAQs

A well-installed Oldcastle cabinet box typically holds up 15 – 20 years; the hardware (hinges, glides) usually fails first, around year 8 – 12. In Huntington Beach’s coastal humidity, boxes near the sink and dishwasher may show swelling sooner. If the boxes are solid and only the hardware is worn, replacing hinges and glides is far cheaper than a full cabinet swap – call (844) 320-2945 for a free estimate on either path.
Often yes. Hinges, glides, and drawer boxes are all replaceable without touching the cabinet frame, and a loose countertop seam can sometimes be re-bonded if caught early. What can’t be repaired economically is a box that has swelled or delaminated, or a countertop slab that has cracked through. We’ll tell you honestly which side of that line you’re on before you spend anything.
A hardware-only swap (hinges and glides) is a same-visit job, usually a few hours. A full cabinet installation runs 2 – 5 days depending on size and whether the layout changes. A countertop replacement is typically 1 – 2 days plus template and fabrication lead time. We give you the schedule in writing before work starts, so you’re not guessing.
We identify your cabinet series from the hinge bore and box construction, then match to OEM or a verified aftermarket equivalent – Blum and Grass for hardware, matched stock for doors and countertop sections. You don’t have to hunt down a part number yourself. Tell us what’s failing and we’ll confirm the fit before anything is ordered. Estimates are free; call (844) 320-2945.
Barrett & Sons Construction Huntington Beach has been owner-operated since 1998, and our technicians bring up to 28 years of experience to every job. We’re an independent contractor, not affiliated with Oldcastle. Every price change comes to you in writing before it touches the job, every eligible job gets permits pulled and inspections signed, and every finished job is covered by our 90-Day Done Right Promise. Call (844) 320-2945 to schedule your free estimate – no trip charge inside the county, and we offer a free second opinion on any written estimate you’ve already received. If you’re a senior or veteran, your permanent 10% discount applies. We publish our name, our address, and our license number – look it up before you sign anything.
Written by the team at Barrett & Sons Construction Huntington Beach, serving Huntington Beach and nearby areas.












