







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Kitchen Remodeling: The Huntington Beach Owner’s Guide
We install Dvele-compatible kitchen work in Huntington Beach, and most full kitchen remodels here run $14,000 – $45,000 depending on how far the scope goes. Smaller jobs, like cabinets only or counters only, land well below that. Owners usually find the problem the same way: a drawer front that stopped sitting flush, a cabinet box that swelled under the sink after a humid summer, or a counter seam that started to lift near the cooktop. Dvele builds panelized, precision-fit homes, so the kitchen parts are matched to a specific cabinet run and wall layout, not a universal box store size.
Which Dvele Models This Applies To

Dvele has built a range of prefab and panelized homes over the years, and the kitchen cabinet runs, millwork tolerances, and counter cutouts differ across those lines. The surest way to identify what you have is the data plate inside the home (usually near the electrical panel or in a utility closet) plus the original build documents. If those are gone, we measure the actual opening: cabinet depth, drawer box width, hinge bore spacing, and counter overhang.
On the OEM-versus-aftermarket question, here’s our honest take. For structural cabinet boxes and anything load-bearing or tied to the panelized wall system, match the original spec. For drawer slides, hinges, toe kicks, and shelf pins, a quality aftermarket equivalent from a name like KraftMaid or a comparable line usually fits and lasts. We don’t claim to stock Dvele parts or carry them on a truck. What we do is measure against your actual kitchen, source the right match, and install it. We’re an independent construction company, not affiliated with Dvele.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Dvele Kitchen Remodeling Is Failing
- Cabinet boxes swelling under the sink. Coastal humidity and a slow drip combine to swell the particleboard core. The finish looks fine until the door stops closing square.
- Drawer fronts that no longer sit flush. Usually a failed slide or a screw pulled loose from the box. Left alone, the front racks and the next drawer down jams.
- Counter seams lifting or darkening near the cooktop or sink. Heat cycling and moisture work the seam. A lifting seam on Cambria or Silestone means the substrate moved, not just the caulk.
- Backsplash tile or grout cracking at the counter line. This is a movement signal. The counter settled or the cabinet run shifted, and the tile is taking the stress.
- Doors that won’t stay shut or rub the frame. Worn hinges or a racked cabinet box. On Dvele’s tight tolerances, a millimeter of rack shows immediately.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what the work runs in Huntington Beach, installed:
| Scope | Installed Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range depends on cabinet box count, counter material, whether the layout changes, and how much of the original Dvele panelized wall has to be opened. Parts and labor are quoted as separate line items, so you see what the part costs and what the install costs. Every price change is a written change order before work happens. All of it is backed by our written 90-Day Done Right Promise.
DIY or Call Us?
You can safely check a few things yourself: open and close every drawer to find the sticking one, look under the sink for staining, press on counter seams, and check that cabinet doors sit flush. If a hinge or slide is loose and the box is sound, tightening or swapping that one piece is reasonable.
Where it goes wrong is the structural side. Cabinet boxes tied into a panelized wall, load-bearing counter runs, and anything near gas or electrical behind the cabinets are not a weekend fix. A wrong cut on a Dvele cabinet box can’t be patched back to spec, and a counter seam that’s re-caulked over a moving substrate fails again within months. If the box is swollen or the counter moved, call us at (844) 320-2945 and we’ll take a look.
FAQs

Quality cabinet boxes and quartz counters should give you 20-plus years in a normal home, but Huntington Beach’s coastal humidity shortens that for anything under a sink or against an exterior wall. Keep the under-sink area dry and you’ll get closer to the full life.
Sometimes yes. A single failed slide, hinge, or loose drawer front is a repair. A swollen cabinet core or a counter seam that lifted can’t be repaired reliably, because the substrate has already moved, and patching it just delays the replacement. We’ll tell you which one you have.
A single drawer or hinge fix is often done in one visit. A cabinet run or countertop replacement typically runs a few days to a couple of weeks depending on material lead times and whether permits are needed. We pull permits and get inspections signed on every eligible job.
We measure the actual opening and match against your build documents or the home’s data plate. We don’t stock Dvele parts or carry them on a truck; we source the correct match, whether OEM or a quality equivalent, and install it. Call (844) 320-2945 for a free estimate and a second opinion on any written quote you already have.
If your Dvele kitchen needs a part matched or a failing section replaced, call Barrett & Sons Construction Huntington Beach at (844) 320-2945 for a free estimate. We’re an owner-operated company, founded in 1998, and a live person answers the phone 24 hours a day. Our technicians have up to 28 years of experience, every eligible job gets permits pulled and inspections signed, and your price changes arrive in writing before work starts. We publish the license number because we want you to look it up.
Written by the team at Barrett & Sons Construction Huntington Beach, serving Huntington Beach and nearby areas.












