







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Midway City, CA | Barrett & Sons Construction Huntington Beach
We’re an independent Unilock contractor serving all of Midway City, and the thing that makes our work here different is simple: in a city barely one square mile wide, most Unilock driveways and patios have to drain onto or alongside somebody else’s property line. That single constraint shapes base prep, edge restraint, and wall drainage on nearly every job we quote in 92655. We install and repair Unilock pavers and wall systems, pull the permits, and put every scope and allowance in writing before work starts. Call (844) 320-2945 to schedule a free estimate.
Why Midway City Residents Choose Us for Unilock Service

Unilock systems aren’t hard to lay. They’re hard to lay correctly on a lot with no room to spare. We know the product lines well because we’ve worked with them across coastal Orange County, and we know how Brussels Block, Cambridge, and Beacon Hill block actually behave a few blocks from the water and a few miles from the dry inland edge. We’re not affiliated with, sponsored by, or authorized by Unilock. We use their systems because they hold up here.
What we bring to a Midway City job is the unglamorous part. Genuine Unilock units and Unilock-specified polymeric sand and edge restraints matched to the correct color run. Base compaction done in lifts, not one pass with a plate compactor. Permits pulled and inspections signed on every eligible job. And if something goes wrong on a driveway or patio we built, the 90-Day Done Right Promise is written into the contract: you make one call and we come back.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Solve in Midway City
- Efflorescence on Brussels Block and Cambridge pavers. That white salt bloom shows up when moisture moves through the units and dries on the surface. In Midway City, irrigation overspray is the usual culprit on tight lots where sprinklers reach the hardscape, and coastal-inland moisture cycling feeds it. We clean and treat the cause, not just the surface.
- Joint sand washout and failed edge restraint. Hardscape that abuts a shared driveway catches concentrated vehicle load and runoff from a neighboring grade. When the edge restraint fails, the sand goes with it. We rebuild the edge and reset the field.
- Color fade and surface scale on smooth Cambridge faces. Hot late-summer spells plus Santa Ana wind-borne dust dull the finish and pit the surface on unsealed pavers facing west and south.
- Hazed or uneven sealer. Sealer applied in the wrong temperature cures cloudy and never evens out. We strip it and reapply under proper conditions.
- Beacon Hill wall settlement and bulging. Retaining walls built on compacted-but-untested soil move once grading changes drainage. That’s common on Midway City lots where a second-story addition or ADU shifts where the water goes.
Unilock Service in Midway City: What Local Conditions Mean for Your Equipment

Midway City‘s footprint is roughly one square mile, and that changes everything about how a Unilock job is built here. Driveways are shared. Lots run postage-stamp tight. Staging happens on public streets with parking already at a premium, and neighbors are close enough to hear a compactor run. On these lots a Unilock paver driveway has to tie into a neighbor’s existing grade and drainage path, which means base prep and edge restraint get designed for runoff arriving from someone else’s property.
That’s the failure pattern we see most. Rocking units and washed-out joints along the shared edge, usually caused by a base that was compacted too shallow and an edge restraint that was missing or undersized, not by any defect in the paver. A qualified approach lifts the affected field, re-grades for positive drainage away from the shared line, re-compacts in lifts, and resets with polymeric joint sand and proper restraint. The same reasoning applies to patios set near a shared property line on the older stucco homes that make up most of the city’s housing stock.
Unilock Models & Products We Service in Midway City
We work with the Unilock lines that make sense for Midway City homes: Brussels Block, the tumbled dimensional paver; Cambridge Pavingstones with ArmorTec, including the Chicago and Abbot series; Beacon Hill smooth-face wall block; and Brussels Dimensional and Mattoni-style large-format pavers. Parts are sourced per job, matched to your existing color run and dimensions so repairs blend in. We use genuine Unilock units and Unilock-specified polymeric sand and edge restraints; aftermarket drainage and restraint components are fine where they meet spec. We don’t claim local stock. Material gets ordered to the job.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Midway City

Here’s what Unilock work runs in the Midway City market. These ranges are for planning; your written quote will be more exact once we’ve seen the lot, the shared-driveway situation, and any drainage issues.
| Service | Typical Range |
|---|---|
| Paver Driveway Installation | $7000 – $18000 |
| Paver Patio Installation | $3500 – $11000 |
| Driveway Replacement | $5000 – $14000 |
| Driveway Sealing | $250 – $700 |
Cost is driven mostly by access and base prep. Tight lots with limited staging, shared-driveway tie-ins, and re-grading for drainage all add labor that a roomy suburban lot wouldn’t need. A free estimate includes a look at the existing base and edge restraint, a drainage assessment relative to the shared line, and a written line-item scope. Call (844) 320-2945 for your free estimate.
Serving Midway City, CA – Our Local Coverage Area
We serve Midway City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Midway City
Are you authorized by Unilock? No. We’re an independent contractor, not authorized, sponsored, or endorsed by Unilock. We install and repair their systems because they perform well in this climate.
Why do my Unilock pavers in Midway City keep getting white powdery streaks? That’s efflorescence, a salt bloom driven by moisture moving through the paver and drying on the surface. On Midway City lots the usual cause is irrigation overspray hitting the hardscape combined with coastal-inland moisture cycling. It can be treated and prevented. Call (844) 320-2945 for an assessment.
Can a Unilock paver driveway work on a shared driveway in 92655? Yes, and it’s done all the time here. It just has to be designed for runoff arriving from the neighboring grade, with a properly compacted base and a real edge restraint on the shared line. Call (844) 320-2945 and we’ll look at the drainage before we quote.
How does a second-story addition or ADU affect my Unilock patio or wall? Grading changes move water. When an addition or ADU changes where runoff goes on a tight lot, patios settle and Beacon Hill walls can bulge if their drainage was designed for the old conditions. Call (844) 320-2945 to schedule a free second opinion on any written estimate you have.
Do Unilock Cambridge pavers need sealing in this climate? Sealing helps with fade and dust on smoother Cambridge faces, but timing matters more than the product. Sealer applied in the wrong temperature cures hazy. Call (844) 320-2945 for a quote on sealing done under proper conditions.
Service Areas Near Midway City
We work Unilock installations and repairs across the surrounding area too, including Huntington Beach, Seal Beach, Los Alamitos, Rossmoor, Cypress, and La Palma, plus Westminster and Garden Grove. If you’re just outside 92655, call and we’ll confirm coverage for your Unilock project.
Book Your Unilock Service in Midway City Today
Whether it’s a new Brussels Block driveway, a Cambridge patio, or a Beacon Hill wall that needs attention, we’ll walk the lot, talk through drainage, and put the scope in writing. Call (844) 320-2945 to schedule your free estimate. You can also read more about our Unilock service and our Midway City service area before you call.
Written by the team at Barrett & Sons Construction Huntington Beach.












