A Barrett company - serving Huntington Beach, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
KraftMaid · Huntington Beach

KraftMaid Fence Installation in Huntington Beach, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Huntington Beach
A galley kitchen opened up to the dining room with a new peninsula
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A new wood side gate with black hardware
A new concrete driveway with a paver border
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
New architectural shingles with a clean valley
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

KraftMaid Fence Installation: The Huntington Beach Owner’s Guide

We install KraftMaid-compatible fence installation for Huntington Beach homeowners, and most completed projects land between $3,500 and $9,000 depending on footage, material, and site prep. We don’t promise same-day installs on planned work, but we do answer the phone live when you call and put the whole scope on paper before anything moves. Most owners discover the problem the same way: a gate that drags on the concrete, a post that has gone soft at the base, or a panel that leans a little more each time the Santa Ana winds come through. KraftMaid hardware and gate components are built to spec, and when one piece of that system fails, the whole run starts to work against itself.

Call (844) 320-2945

Which KraftMaid Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

KraftMaid cabinet and millwork hardware shows up all over Huntington Beach properties where a previous owner carried the brand outside the kitchen. For fence gates and matching trim, the model identification matters more than most homeowners expect. Look for the KraftMaid label inside the gate frame or on the hinge plate; the number stamped there tells us the series and the exact hinge or latch pattern.

If the label is gone, we measure. Hinge spacing, gate stile width, and post cap dimensions are usually enough to match the correct fence hardware. The OEM-versus-aftermarket decision is where people get burned. KraftMaid OEM gate hardware is sized to a tight tolerance, and a cheaper aftermarket hinge that looks close will often bind after a season of coastal humidity. We quote both options in writing so you can see the price difference and decide. Other brands we also service include Cambria, Silestone, and Kohler. Barrett & Sons Construction Huntington Beach is an independent service provider and is not affiliated with KraftMaid.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your KraftMaid Fence Installation Is Failing

  • Gate sagging and dragging on the ground. A hinge is pulling loose from the stile or the post has shifted. Huntington Beach’s marine air softens wood faster than inland climates, so the post is usually the real culprit.
  • Post rot at the soil line. Water wicks up from the concrete footing and the wood never fully dries. Press a screwdriver into the base: if it sinks easily, the post is gone.
  • Loose or missing hinges and latch hardware. KraftMaid gate hardware is stout, but salt air corrodes fasteners over time. Once one screw backs out, the others follow.
  • Racking or leaning panels. The fence run has lost its plumb line, usually because one footing heaved or the framing connection loosened. A leaning panel puts stress on every gate and post down the line.
  • Rust streaks and finish failure on metal components. Coastal humidity attacks the finish first, then the metal underneath. Catching it early means a hardware swap; waiting means a full post replacement.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A new bay window with a cushioned seat

For Huntington Beach fence installation, our installed range runs $3,500 to $9,000. Vinyl fence installation lands at $3,500 to $9,000, and aluminum fence installation runs $4,000 to $10,000. What pushes a project toward the top of that range: total footage, gate count, post replacement, and whether we’re matching existing KraftMaid hardware or sourcing a new pattern.

You’ll get a written scope with parts and labor broken out separately, and every price change arrives as a written change order before we touch the job. Every eligible job gets permits pulled and inspections signed. And the work is covered by our 90-Day Done Right Promise, written on the contract: if it’s not done right, Tom comes back and makes it right on one call.

DIY or Call Us?

You can safely check a few things yourself. Test post bases with a screwdriver, photograph the KraftMaid label, measure hinge spacing, and note where the gate binds. What you shouldn’t do is dig out and reset a footing on your own. Huntington Beach soil and coastal drainage are less forgiving than they look, and a shallow post will lean again within a season. Height work on tall panels is also a real fall risk, which is why we keep it on our crews.

DIY usually goes wrong at the footing and at matching the existing KraftMaid hardware pattern. We measure once, source the right part, and install it to spec. Call (844) 320-2945 for a free estimate.

FAQs

A new casement window over a kitchen sink

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new paver pool deckA walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seatA standing-seam metal roof over a covered porchA new white vinyl privacy fence with a double gateA remodeled hall bathroom with patterned floor tile and painted walls

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Barrett in Huntington Beach

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Huntington Beach team

A local vetted partner works across Huntington Beach and the towns around it, to the same written standard as every Barrett job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-2945
Local Service Coverage

Request a Free Estimate in Huntington Beach

Tell us what you need - Barrett & Sons Construction Huntington Beach responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch