A Barrett company - serving Huntington Beach, CA
A remodeled primary bathroom with a soaking tub and a walk-in shower
Moen · Huntington Beach

Moen Roofing in Huntington Beach, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Huntington Beach
A remodeled hall bathroom with subway tile and a floating vanity
A remodeled hall bathroom with patterned floor tile and painted walls
A wood double vanity with two mirrors after a bathroom remodel
An open kitchen and dining area after a remodel
A second-story addition that matches the existing roofline
A newly finished roof with a ridge vent and step flashing
A new front entry door with glass sidelights
A new black aluminum pool fence with a gate
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Moen Roofing: The Huntington Beach Owner’s Guide

Moen-compatible roofing components here in Huntington Beach typically install for $400 to $1,800 for a spot repair and $8,000 to $20,000 for a full replacement, and we schedule free estimates within a few days, not the same day. Owners usually find out something’s wrong when a ceiling stain shows up after a Santa Ana wind event, when granules start collecting in the gutter after the first fall rain, or when a roofer on a neighbor’s job points at a lifted flashing and says, “You’ve got Moen up there, don’t you?”

Call (844) 320-2945

Which Moen Models This Applies To

A tile setter installing wall tile in a shower

Moen’s roofing line runs through a few product families, and the part you need depends on which one is on your house. The metal roofing panels and their closure strips are the most common in Huntington Beach because the salt air chews through lesser fasteners fast. The underlayment systems and the vent and flashing kits are the other two. Before you order anything, find the stamp on the back of a panel or inside the ridge cap – Moen puts a series code there, usually starting with a letter and three or four digits.

Don’t trust the label on a box the last owner left in the garage. Measure the panel rib spacing and the fastener gauge with a tape and a caliper instead. Moen changed its panel profiles more than once, and a 1-inch rib from one series won’t sit flush against a 1 1/4-inch rib from another. That mismatch is the number one reason a “compatible” part doesn’t fit.

On the OEM-versus-aftermarket question: for fasteners and closure strips, a quality aftermarket part from a name you can look up is fine and saves money. For flashing and vent boots, stay OEM. The tolerances are tighter than they look, and a cheap aftermarket boot will crack at the collar within two or three Huntington Beach summers. We’ll tell you which way to go on your specific panel when we’re up there.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Moen Roofing Is Failing

Here’s what actually fails first on a Moen system in our climate, and why:

  • Granule loss in the gutters after fall rain. The underlayment is breaking down. Huntington Beach sun bakes it faster than inland because of the reflected glare off the water, and once the granules are gone the membrane is exposed.
  • Rust streaks at the fasteners. The screws lost their coating, usually from salt air corrosion. Left alone, the rust creeps into the panel and the hole widens.
  • Lifted or curling flashing at the chimney or skylight. The sealant dried out and the flashing pulled free. This is the leak you’ll find on the ceiling next, not the roof.
  • Sagging between rafters. Could be a fastener backing out or a panel that lost its grip. Either way it’s a five-minute look and a two-hour fix if you catch it early.
  • Whistling or rattling in high wind. A closure strip came loose. Santa Ana winds will find that gap and work it wider every season.

If you’re seeing two or more of these, don’t wait for the next rain. Call and get eyes on it.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A new multi-panel patio door opening a kitchen to the patio

Here’s what Huntington Beach homeowners actually pay, installed, on a Moen-compatible job:

Job Installed Price
Roof repair (flashing, fasteners, closure strips) $400 – $1,800
Tile roof repair $600 – $2,500
Full roof replacement $8,000 – $20,000
Metal roof installation $15,000 – $40,000

What drives the range: roof size and pitch, how many layers come off, whether the decking is sound underneath, and which panel or underlayment spec you’re matching. A simple flashing repair on a flat section sits at the low end. A full tear-off with new underlayment on a steep pitch climbs toward the top.

Every price comes as a written line-item quote, part and labor broken out separately so you can see what you’re paying for the hardware versus the work. If we open it up and find rot we didn’t see from the ladder, you get a written change order before we touch another nail. No surprise bill at the end.

DIY or Call Us?

Some checks are safe for you, and we’ll tell you which. Walk the yard after a rain and look for granules in the gutter. Get on a ladder only if it’s stable and only to ground level – look for rust streaks at fasteners and lifted flashing from below. Take a photo. That’s where the safe DIY part ends.

Getting up on the roof to reseal flashing or replace a panel is where people get hurt. A wet Huntington Beach roof, a steep pitch, and a 20-foot fall don’t mix, and a bad flashing job turns a $500 repair into a ceiling redo. We send a background-checked crew with the right fall gear. The part swap itself takes a couple hours once we’ve matched it and the weather’s clear. Call (844) 320-2945 and we’ll get a free estimate on the calendar. Ask about the $40 off any repair over $200, no trip charge inside the county, and the 10% senior and veteran discount while you’re at it.

FAQs

A new stained cedar privacy fence

How long does a Moen roofing system last in Huntington Beach? Expect 15 to 20 years on the panels and 10 to 15 on the underlayment if it’s maintained, shorter if salt corrosion gets ahead of you. The underlayment fails first here because the coastal air and sun are harder on it than inland weather. Call (844) 320-2945 for a free inspection and an honest read on what’s left.

Can it be repaired instead of replaced? Often yes. A failed flashing, a handful of rusted fasteners, or a loose closure strip is a repair, not a roof. If more than about a quarter of the panels show corrosion or the underlayment is shot across the deck, replacement is the better money. We’ll show you which one you’re looking at in writing.

How long does the swap take? A repair is typically a half day. A full replacement runs two to four days depending on size and weather. We pull permits and get inspections signed on every eligible job, so you’ll know it’s done right, not just done.

How do you source the part? We match your panel series and order the OEM piece or a quality equivalent, whichever is right for the job. We don’t stock parts or carry them on a truck, so we’ll confirm the lead time up front and put it in the written quote. We’re an independent contractor, not affiliated with Moen, but we know the line. We also handle KraftMaid, Cambria, and Silestone on the interior side if you’re doing more than the roof while we’re out.

If you’re tired of one price on the phone and a different bill at the door, give us a call. We’re local, we publish our name and license number so you can check us, and a live person answers the phone around the clock. Call (844) 320-2945 to schedule your free estimate in Huntington Beach, and ask about the free second opinion on any written estimate you’ve already got.

Written by the team at Barrett & Sons Construction Huntington Beach, serving Huntington Beach and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new clay tile roofNew double-hung windows in a dining roomA new front yard fence with a matching gateA new paver pool deckA new curved paver walkway to the front porchA galley kitchen opened up to the dining room with a new peninsula

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Barrett in Huntington Beach

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Huntington Beach team

A local vetted partner works across Huntington Beach and the towns around it, to the same written standard as every Barrett job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-2945
Local Service Coverage

Request a Free Estimate in Huntington Beach

Tell us what you need - Barrett & Sons Construction Huntington Beach responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch