







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Delta Driveway & Pavers: The Huntington Beach Owner’s Guide
Delta doesn’t manufacture driveway and paver products – it’s a brand we get asked about for kitchens and baths. So here’s the honest answer: if you’re reading this because of a Delta driveway part, you’re likely looking at a name printed on a hardscape accessory, not a Delta paving system. What we actually install for Huntington Beach homeowners is Belgard or Techo-Bloc pavers and poured concrete, priced from $7,000 to $18,000 for a paver driveway and $4,500 to $12,000 for concrete. Most owners discover a failing driveway after a winter of standing water, a sunken paver grid near the garage, or a crack that doubled in length over one summer. We’ll help you sort out what you have and what it costs to fix it right.
Which Delta Models This Applies To
Delta’s model lines are built around fixtures and fittings – shower valves, faucets, toilets – not driveways or pavers. If a product label on your property reads Delta in connection with a hardscape item, check the full spec plate before assuming anything: Delta shower rough-in valves carry series names like R10000-UNBX, and Delta faucets use model numbers such as 9178T-DST. A paver or driveway part with a Delta sticker is almost certainly a reseller label or a misremembered name. Look at the actual data plate on your garage door opener, sump cover, or driveway drain component – those manufacturers are names like Chamberlain, Zurn, or NDS. When you call us, read us the plate. We’ll tell you whether it’s Delta at all, and if it’s not, we’ll point you to the right system. Compare OEM versus aftermarket on hardscape parts carefully: OEM paver edge restraints and polymeric joint sand matter more than a name for lifespan, and aftermarket equivalents from Belgard or Techo-Bloc hold up better in our salt air than most generic imports.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Delta Driveway & Pavers Is Failing
Here’s what we see on Huntington Beach properties, and what’s usually underneath it:
- Standing water after rain. Usually a graded base that settled, or a paver that shifted and broke the joint line. Water pooling near the garage threshold becomes a foundation problem within a season.
- Sunken or tilted pavers near the garage. Base course compaction was too shallow. A proper base is 4 to 6 inches of compacted Class II aggregate – anything less sinks under a truck once.
- Weed growth between joints. Polymeric sand has washed out. Once sand is gone, the pavers rock, and rocking pavers crack at the corners.
- Long cracks in concrete. In our coastal climate, temperature swings and salt-laden air open hairline cracks into structural ones. A crack wider than a quarter-inch signals a slab that’s moving.
- Spalling or chipped paver faces. Salt air and UV attack poor-quality sealers. A surface that’s flaking is one winter from crumbling.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Replacing a paver driveway in Huntington Beach runs $7,000 to $18,000 installed. Concrete driveway installation lands between $4,500 and $12,000, and a full driveway replacement comes in at $5,000 to $14,000. Those ranges cover demo and haul-off, base prep and compaction, edge restraints, polymeric joint sand, and cleanup. What drives the number up: site access (narrow beachside driveways cost more), utility relocation, drainage corrections, and paver selection – Belgard and Techo-Bloc premium lines sit at the top. What drives it down: keeping the existing base if it’s sound. Every price change lands on a written change order before we touch the job, and every eligible job is permitted and inspected. Sealing runs $250 to $700 as a separate service and should wait 60 to 90 days after installation to cure.
DIY or Call Us?
You can safely check a few things yourself: walk the driveway after rain and note where water pools, look for pavers raising above their neighbors, and photograph any crack with a tape measure for scale. What you shouldn’t attempt is the fix. Rebuilding a base course, re-setting edge restraints, and re-grading for drainage require compaction equipment, and a driveway that drains wrong doesn’t just look bad – it directs water into your slab and your garage. A homeowner in a neighboring community tried a weekend paver reseat and ended up redoing the whole job once water got under the slab. Call (844) 320-2945 and we’ll walk the driveway with you, tell you honestly if you need a full replacement or a targeted fix, and put what we recommend in writing.
FAQs

A well-installed Belgard or Techo-Bloc paver driveway lasts 25 to 30 years in our climate, with resealing every three to five years. The base is what determines lifespan – salt air and coastal fog are hard on surfaces, but properly compacted base failure is what kills most driveways here. Call (844) 320-2945 and we’ll tell you what your base looks like before we quote anything.
Yes, if the failure is localized – a handful of sunken pavers, a broken edge restraint, or a failed joint line can often be repaired without a full tear-out. Repairs typically run a fraction of replacement cost. Whole-driveway heaving, deep base failures, or a slab with structural cracks usually mean replacement is the cheaper path over ten years. Call (844) 320-2945 for a free second opinion on any written estimate you already have.
A paver driveway replacement typically takes three to five working days depending on square footage, site access, and whether we’re correcting drainage. Concrete driveways cure for five to seven days before you drive on them. We schedule the work with a written scope so you know exactly what day we start and what day we finish.
We source from authorized Belgard and Techo-Bloc distributors, so the paver you see in the showroom is the paver you get – not a mystery-brand substitute off a van. If you need a specific OEM part for an existing driveway, we’ll identify the manufacturer from the plate or a sample and pull the correct replacement. KraftMaid, Cambria, and Silestone are the other brands we install across our trades, but on driveways it’s Belgard and Techo-Bloc.
Written by the team at Barrett & Sons Construction Huntington Beach, serving Huntington Beach and nearby areas.
Barrett & Sons Construction Huntington Beach is an independent local service provider, not affiliated with Delta. Call (844) 320-2945 for a free estimate – we’ll walk your driveway, tell you straight whether you need a repair or a replacement, and put every number in writing before we start.












