







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Kitchen Remodeling: The Huntington Beach Owner’s Guide
If you’ve got a Schluter profile, membrane, or drain that’s failing in a kitchen, replacement is rarely a “part swap” – it’s a small tiling and waterproofing job. In Huntington Beach, kitchen remodeling with Schluter components typically runs $14,000 – $45,000 for a full remodel, or $9,000 – $20,000 for a smaller kitchen. Most of the Schluter-specific work happens during a scheduled remodel, not same-day.
Owners usually discover the failure slowly. Grout cracks in one line, then keeps coming back. A tile sounds hollow when you tap it. A Schluter curb or edge profile lifts at a corner. Wet joints stay wet. By the time the visible symptom shows, the membrane or trim underneath has usually been failing for a while.
Which Schluter Models This Applies To

Schluter makes hundreds of SKUs. For a kitchen, the parts that come up most are DITRA and DITRA-HEAT uncoupling membranes, KERDI and KERDI-BAND waterproofing, the KERDI-LINE and KERDI-DRAIN series (mostly for wet kitchens and prep sinks), SCHIENE and JOLLY edge profiles, RENO-U and RENO-TK transition profiles, and DILEX movement joints. Each is sold in set widths – 3/8″, 1/2″, 5/16″, and metric equivalents – and the width is measured on the tile, not the substrate. Order the wrong width and the profile won’t cover the joint.
How to identify the right part: every Schluter box carries the product name and size on a printed label. If the box is gone, measure the tile thickness with a caliper and match it to the profile’s listed range, not the “closest” size. For membranes, the roll width and the stamped pattern tell you DITRA vs. KERDI instantly.
OEM vs. aftermarket: we don’t carry parts and we don’t stock Schluter on a truck. When we source, we use Schluter OEM for anything that has to match the profile’s height and geometry exactly – transitions, edge trims, drain rings – because a copy in the same nominal size can sit 1/32″ proud and show. For membranes and flat goods, we still use OEM; the warranty chain with Schluter depends on using their system as a system.
Barrett & Sons Construction Huntington Beach is an independent remodeling contractor. We’re not affiliated with Schluter – we install their products.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Kitchen Remodeling Is Failing
- Grout cracks that keep returning in the same line. That’s usually movement the membrane didn’t absorb, or a missing movement joint at the perimeter. Re-grouting fixes the look for a season, not the cause.
- Tiles sound hollow under a tap. In Huntington Beach, where slab-on-grade kitchens get warm and the ground moves a little, a hollow sound along a run often means the thinset debonded from the membrane or the membrane debonded from the slab.
- Edge profile or trim lifts at a corner. Usually a profile set over an uneven substrate, or screws were never backed out properly. The profile bends once and never sits flat again.
- Water wicks behind a backsplash or under a sink edge. That’s a KERDI or KERDI-BAND failure – usually a seam that was overlapped in the wrong direction or a corner where the band was cut instead of folded.
- Drain ring or shower pan in a wet kitchen showing mineral staining. Hard water plus a slow drain means water is standing where it shouldn’t. Left alone, the membrane underneath will degrade.
Replacement Cost & What’s Included

Installed ranges in Huntington Beach for the work that surrounds the Schluter part:
- Full kitchen remodel with Schluter membrane and profiles: $14,000 – $45,000
- Smaller kitchen remodel: $9,000 – $20,000
- Backsplash only, with KERDI and edge profiles: $800 – $2,500
- Cabinet installation (KraftMaid, Cambria or Silestone countertops available): $4,000 – $13,000
- Countertop installation: $2,000 – $6,500
- Kitchen island installation: $3,000 – $10,000
What drives the range: how much tile has to come up to reach the failed membrane, whether the substrate is sound, and whether we’re matching into existing tile or replacing the whole run. Parts plus labor are listed separately on the written estimate – we don’t fold the material into a lump sum. Every price change arrives as a written change order before work moves. Every job is backed by our 90-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check three things yourself: tap tiles for hollow spots, look behind the edge profiles for lifting, and check the drain ring in a wet kitchen for staining or standing water. Write down what you find. That’s a five-minute look and it tells us a lot on the phone.
What you shouldn’t do: pull up tile to “see what’s underneath.” You’ll break more tile than you find, and the membrane you expose is not one you can re-seal without the right band, corner pieces, and thinset. There’s no dangerous component here, but there is a real risk of turning a fixed $800 backsplash job into a $14,000 kitchen because the waterproofing line got opened and not closed correctly. Call us and describe it – (844) 320-2945, answered by a live person any hour.
FAQs

A properly installed Schluter system typically lasts the life of the tile floor or wall over it – 20 to 30 years or more in normal kitchen use. The failure is almost never the membrane itself. It’s the seam, corner, or termination detail that was done wrong at install. In Huntington Beach, we see terminations at exterior door thresholds fail first, because moisture gets in from outside the envelope.
Sometimes, yes. A single lifted profile or a failed grout line over a sound membrane can be fixed in a day. A failed seam or a wet KERDI corner usually means opening that section – there’s no patching a waterproofing failure from the surface. We look, tell you which one it is, and quote both paths in writing.
A profile or trim replacement is a half-day to a day with cure time. A backsplash with membrane work is 2 to 3 days. A full kitchen with Schluter under the tile runs with the broader remodel. We don’t promise same-day on planned remodel work – that would be a lie – and we don’t take shortcuts to fake it.
We order Schluter OEM through distributors, matched to your tile thickness and the product size on your box label or on our measurement. You see the line item and the SKU on your estimate before we order. Call (844) 320-2945 for a free estimate – and if you already have a written quote from someone else, we’ll give you a free second opinion on it. Our technicians have up to 28 years of experience installing tile and Schluter systems.
Get an Estimate in Huntington Beach
Barrett & Sons Construction Huntington Beach installs Schluter systems in kitchens and baths across Huntington Beach and the surrounding neighborhoods. Every eligible job gets permits pulled and inspections signed. Premium brands across every trade – Schluter in tile, KraftMaid and Cambria in kitchens, Silestone on counters – because you can look them up. Call (844) 320-2945 for a free estimate. A live person answers, any hour. Ask about the $40 Off Any Repair Over $200, the Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and the permanent 10% Senior & Veteran discount.
Written by the team at Barrett & Sons Construction Huntington Beach, serving Huntington Beach and nearby areas.












