







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Kitchen Remodeling: The Huntington Beach Owner’s Guide
Tamko-compatible kitchen remodeling in Huntington Beach typically runs $14,000 – $45,000 installed, depending on cabinet layout, countertop square footage, and whether walls move. We install and coordinate the full scope – cabinets, counters, backsplash, island work – using premium brands like KraftMaid and Cambria, with permits pulled and inspections signed on every eligible job. Kitchen work is planned work, so we schedule it properly rather than promising same-day delivery that no contractor can honestly deliver.
Most Huntington Beach owners don’t start by asking about a brand. They start with a symptom: a cabinet door that won’t stay closed, a countertop seam that has gone dark, a backsplash running a hairline crack behind the cooktop. By the time they call us, they’ve usually already had one quote from an out-of-state outfit over the phone and a different number at the door. That’s the pattern we hear most in this city, and it’s the reason we put scope, allowances, and every change order in writing before a nail moves.
Key Takeaways
- Typical Tamko-scope kitchen remodel in Huntington Beach: $14,000 – $45,000 installed.
- Cabinets are usually the biggest line item; counters and backsplash run separately.
- Every price change is a written change order issued before work proceeds.
- Permits pulled and inspections signed – the inspector works for you, not for us.
Which Tamko Models This Applies To

Tamko makes roofing and building products, and its name shows up in kitchens through dealers, showrooms, and bundled remodel packages rather than a single dedicated kitchen cabinet line. What that means practically: there’s no universal “Tamko kitchen part number” to look up. When a homeowner tells us they have a Tamko-labeled kitchen package, the useful information is in the specification sheet that came with it or the label inside the cabinet door, not on the brand name alone.
Here’s the compatibility gotcha that costs people money. Cabinet boxes are sized by width in three-inch increments, and door and drawer fronts are ordered to a specific overlay and hinge bore pattern. A door from a similar-looking series often won’t fit your box – the hinge bore is drilled at a different offset and the overlay runs a different depth. Before you order any replacement front, measure the actual cabinet box width and height, then measure the hinge cup bore diameter and its distance from the door edge. That measurement, not the brand, tells you what fits.
On the OEM-versus-aftermarket question for Tamko specifically: OEM replacements give you an exact match to the original series and finish. Quality aftermarket fronts (from established cabinet-component makers) can match the size and function at lower cost, but the finish sheen and grain pattern will rarely match an aged original door exactly. For a full remodel, that mismatch stops mattering because everything gets replaced together. For a single failed door in an otherwise sound kitchen, it matters a lot. That’s the honest decision point.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Tamko Kitchen Remodeling Is Failing
- Doors that swing open or won’t latch. The hinge has lost tension or the bore has wallowed out from years of use. A hinge swap fixes the first; a wallowed bore usually needs a new front.
- Drawer boxes that grind or stick. Undermount slides wear at the roller, and particleboard boxes swell after a slow leak under the sink. If the box is swollen, replacing the slide alone won’t last.
- Dark seams on the countertop. Water has gotten under a seam or a caulk line has failed. Left alone, that moisture reaches the cabinet substrate below.
- Hairline cracks at the backsplash corners. Usually movement, not impact – the house settles or the tile was set too tight against the counter. In Huntington Beach, salt air and marine humidity accelerate the caulk failure at those joints.
- Soft spots or bubbling near the sink and dishwasher. The most common failure we see, and the one owners notice last. A slow supply-line drip under the cabinet floor can run for months before the toe kick shows it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Installed pricing in Huntington Beach, itemized so you can see what drives the total:
| Scope | Installed Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
The range moves with three things: how many cabinet boxes change, the countertop material and square footage, and whether electrical or plumbing has to be relocated. A cabinet swap keeps you near the low end. Moving a sink or adding an island circuit pushes it up. We quote parts and labor separately so you can see where the money is going, and the price doesn’t shift once it’s signed unless you approve a written change order. Every completed job carries our 90-Day Done Right Promise – if something isn’t right, one call brings Tom back to fix it.
DIY or Call Us?
Hinges, drawer slides, and cabinet pulls are fair game for a homeowner with a screwdriver and a Saturday. So is re-caulking a backsplash joint at the counter – that’s routine maintenance in a coastal climate and worth doing every couple of years. Measuring for a replacement door is also something you can do yourself; just measure twice and write the numbers down.
Where DIY goes wrong: cabinet boxes are load-bearing in a way most people underestimate. Taking out a run of base cabinets to fix a soft floor means the countertop above has to come off first, plumbing has to be capped, and electrical in the wall has to be de-energized before anyone touches it. If your kitchen has a gas range, moving or reconnecting that line is not a homeowner job – we bring in a licensed gas fitter, and we tell you that before the job starts, not after. Permits are the other line. Most Huntington Beach kitchen work that moves plumbing, gas, or electrical requires one, and an unpermitted job can come back at resale. Call (844) 320-2945 and we’ll tell you plainly what needs a permit and what doesn’t.
FAQs

Factory cabinet fronts and boxes typically hold up 15 to 25 years in a normal kitchen, though marine humidity in Huntington Beach shortens that on the sink wall. The substrate around the sink and dishwasher fails first, often a decade before the rest of the kitchen. Call (844) 320-2945 and we’ll look at your actual boxes before you spend anything.
Often, yes. A single failed door, a worn hinge set, or one cracked backsplash tile can usually be repaired rather than replaced. Full replacement makes sense when the boxes themselves are swollen or the layout no longer works. We’ll give you both numbers in writing so you can decide. Call (844) 320-2945 – estimates are free.
A cabinet front swap runs one to three days. A full kitchen remodel with counters and backsplash usually runs three to six weeks depending on permit turnaround and material lead times. We tell you the schedule in writing up front and update you the moment anything shifts.
We source through the manufacturer’s dealer network and established cabinet-component suppliers, matched to your cabinet box measurements and hinge bore pattern rather than the brand name alone. We don’t claim to carry parts on a truck – every part is ordered to your kitchen. That’s why measurement accuracy matters before the order goes out.
Barrett & Sons Construction Huntington Beach is an independent service provider and is not affiliated with Tamko. We also work with KraftMaid, Cambria, and Silestone for kitchen scopes, so you’re not locked into one label.
If you’re in Huntington Beach and staring at a kitchen that needs work, call (844) 320-2945 for a free estimate. We’re a live answer, a written scope, a permit pulled, and a face you’ll see again at the hardware store. Our technicians have up to 28 years of experience, and every eligible job is backed by the 90-Day Done Right Promise. Ask about our $40 Off Any Repair Over $200, the Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and the permanent 10% Senior & Veteran discount.
Written by the team at Barrett & Sons Construction Huntington Beach, serving Huntington Beach and nearby areas.












