A Barrett company - serving Huntington Beach, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
CGI · Huntington Beach

CGI Kitchen Remodeling in Huntington Beach, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Huntington Beach
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A remodeled kitchen with a waterfall island and wood cabinets
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
A new multi-panel patio door opening a kitchen to the patio
A new stained cedar privacy fence
A new paver patio with a seat wall and fire pit
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

CGI Kitchen Remodeling: The Huntington Beach Owner’s Guide

CGI kitchen remodeling in Huntington Beach typically runs $14,000 – $45,000 installed, depending on cabinet layout, counter selections, and whether the scope is a full gut or a cabinet-and-counter refresh. We install and coordinate CGI-compatible products – cabinets, doors, drawer fronts, hardware, and trim – for kitchens across Huntington Beach, and we quote the parts and labor as separate line items so you see exactly what you’re paying for. Most owners don’t discover a failing CGI component all at once. It starts with a door that won’t sit flush, a drawer that drags near the dishwasher, or a hinge screw that spins instead of biting. One small annoyance becomes two, and by the time you’re pricing replacements you’ve already lived with it for a season.

Call (844) 320-2945

Key Takeaways

  • Installed CGI kitchen remodeling in Huntington Beach: $14,000 – $45,000.
  • Cabinet boxes and door fronts usually outlast hinges, slides, and hardware by years – those small parts fail first.
  • We’re an independent contractor and not affiliated with CGI; we source compatible parts and install them.
  • Every eligible job gets permits pulled and inspections signed, and every price change arrives as a written change order first.

Which CGI Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

CGI products show up in kitchens in a handful of ways, and the part you need depends on which one you own. Cabinet lines differ by series and by door style, and the hinge and slide patterns inside those boxes aren’t universal. So the first job is identification, not ordering.

The label is the place to start. Look inside the cabinet box on the back panel, on the underside of a drawer, or on the door’s interior edge. Most CGI labels list a series number, a door style code, and a finish code. Write all three down. Then measure the actual opening – hinge cup boring diameter (35mm is common but not guaranteed), slide length, drawer box height, and door overlay. Photos with a tape measure laid flat beside the part save a return trip.

On the OEM-versus-aftermarket question: for hinges and slides, a quality aftermarket equivalent that matches the boring pattern and load rating will do the job and often costs less than an OEM replacement. For door fronts, drawer fronts, and anything where the finish has to match the rest of the run, go OEM or expect a visible mismatch under Huntington Beach afternoon light. That’s the honest split.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your CGI Kitchen Remodeling Is Failing

These are the failures we see most often when we’re called out to look at a CGI kitchen in Huntington Beach. Each one has a cause worth knowing before you spend money.

  • Doors sagging or rubbing at the corner. The hinge screws have stripped out of the cabinet stile, or the hinge itself has lost tension. A stripped screw hole in particleboard won’t hold a new screw without a repair insert – replacing the hinge alone won’t fix it.
  • Drawers that bind or won’t close tight. Usually a worn slide, but sometimes a drawer box that’s racked out of square. Check the slide first; if the box is racked, a new slide won’t sit right.
  • Soft-close that stopped being soft. The dampener in the hinge or slide has failed. This is a parts swap, not a rebuild – but the replacement has to match the original bore pattern or you’re drilling new holes.
  • Finish blistering or peeling near the range or sink. Coastal humidity and steam do this to lower-grade finishes over time. If it’s isolated to a couple of fronts, replace those. If it’s spread across the run, the finish has reached the end of its service life.
  • Water staining at the toe kick or under the sink base. Slow leaks swell the cabinet bottom. The staining is the visible part; the swollen board underneath is the real problem, and it’s a box repair, not a door swap.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled hall bathroom with patterned floor tile and painted walls

Here’s what our Huntington Beach customers actually pay for CGI-compatible kitchen work, with parts and labor shown as separate lines in the written quote:

Scope Installed Range
Full kitchen remodel $14,000 – $45,000
Small kitchen remodel $9,000 – $20,000
Cabinet installation $4,000 – $13,000
Countertop installation $2,000 – $6,500
Backsplash installation $800 – $2,500
Kitchen island installation $3,000 – $10,000

What drives the range on a Huntington Beach job: cabinet line and door style, whether the layout moves (plumbing and electrical relocation adds real cost), counter material, and ADA or code-driven clearances. We price parts and labor separately so you can see what a hinge-and-slide refresh costs versus a full cabinet replacement. Every completed job carries our written 90-Day Done Right Promise, and any change to scope or allowance arrives as a written change order before the work happens.

DIY or Call Us?

Some of this is safe to handle yourself. Swapping a drawer slide, replacing a cabinet knob or pull, tightening a hinge screw that still has bite, and cleaning and lubricating tracks are all reasonable weekend work. Measure twice here – the boring pattern on the new part has to match the old one or you’re drilling into a finished door.

Where DIY goes wrong: cabinet removal and reinstall, countertop work, anything touching plumbing or gas lines under the sink or behind the range, and electrical for under-cabinet lighting or a new island outlet. Those aren’t “harder than they look” jobs – they’re jobs where a mistake means water where it shouldn’t be, a gas smell, or a permit problem when you sell. If your CGI kitchen in Huntington Beach needs cabinet work, a water-damaged box repaired, or a layout change, that’s our lane. Call (844) 320-2945 and we’ll give you a free estimate with the parts and labor broken out.

FAQs

A wood double vanity with two mirrors after a bathroom remodel

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A single-story rear room addition with tall windows and a new patioA new clay tile roofNew double-hung windows in a dining roomA new front yard fence with a matching gateA new curved paver walkway to the front porchA walk-in shower with large-format tile and a built-in niche

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Barrett in Huntington Beach

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Huntington Beach team

A local vetted partner works across Huntington Beach and the towns around it, to the same written standard as every Barrett job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-2945
Local Service Coverage

Request a Free Estimate in Huntington Beach

Tell us what you need - Barrett & Sons Construction Huntington Beach responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch