







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Kitchen Remodeling: The Huntington Beach Owner’s Guide
Kitchen remodeling built around ES Windows products in Huntington Beach typically runs $14,000 to $45,000 installed, and the timeline depends on what your kitchen needs, not on how fast anyone can show up. We plan these jobs in writing, pull the permits, and schedule the work in the order your home can live through it. You won’t get a same-day remodel, and anyone who promises one is telling you something that isn’t true.
Here’s how Huntington Beach owners usually find the problem first: a window that no longer seats right after a kitchen rebuild, a slider that binds once cabinets or counters go in around it, or a older ES Windows unit whose frame has moved just enough to leak air at the coast. Sometimes the part itself is fine and the install around it wasn’t. The kitchen is where ES Windows products take the most abuse, because heat, moisture from cooking, and the salt air off the water all work on the same frame.
Key Takeaways
- Installed kitchen remodels in Huntington Beach run $14,000 to $45,000, with scope driving the number.
- ES Windows products need a fit check after cabinetry and counters are placed, not before.
- Salt air and coastal humidity are hard on frames and seals in Huntington Beach.
- Every scope change and allowance goes in writing before work proceeds.
- Permits are pulled and inspections are signed on every eligible job.
Which ES Windows Models This Applies To

ES Windows has been sold into Southern California homes across several lines, and the specific part you need depends on which line your house got. The reliable way to identify yours is by looking at the etched glass label in the corner of the pane (the IGMA or manufacturer mark), the frame profile, and the rough opening measurements. Don’t match a part off a picture from a listing site. Measure the opening, note the frame material, and write down the label code before you call anyone.
On the OEM side, ES Windows can supply replacement sashes, glazing, and hardware matched to the original line. The tradeoff is cost and lead time, and some older lines have limited part support. Quality aftermarket equivalents exist for hardware, weatherstripping, and sealing components, and they can be the practical answer when the OEM part is discontinued or slow. The decision is not about what’s cheaper; it’s about whether the part will fit the frame you actually have, and nobody should guess that over the phone.
We’re an independent contractor and not affiliated with ES Windows. We work with the brand as a system to plan around, which means we read your label and measurements and match the replacement to what’s really in your wall.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Kitchen Remodeling Is Failing
These are the failure patterns we see most in Huntington Beach kitchens. Each one has a cause you can actually trace.
- Air leaks or drafts along the frame. The seal or weatherstripping has aged out, and coastal humidity speeds that along. It reads as a draft in winter and a heat gain in summer.
- Condensation between the panes. The insulated glass seal has failed and moisture has gotten inside the unit. Once that happens, the pane has to be replaced, not dried out.
- The window or slider binds when it opens. Settling or a kitchen rebuild that shifted the casing has pinched the track or sash. Forcing it will make it worse and can crack the frame.
- Water staining at the interior sill after rain. The flashing or perimeter seal around the window has failed. This is the one that rots trim and drywall if it’s ignored through a wet season.
- Visible frame deflection or gaps at the casing. The frame has moved or was never shimmed properly. This shows up after a kitchen rebuild when new cabinetry and counters change the load on the wall.
Replacement Cost & What’s Included

For Huntington Beach, the numbers below are installed ranges: parts plus labor, with permit work folded in where the job requires it. Scope drives the spread more than any single part does.
| Work | Installed range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What moves the number: whether the wall openings change, how many windows or sliders need re-seating, cabinet and counter choices (KraftMaid, Cambria, and Silestone are options we work with), and whether the job needs a permit and inspection. Every allowance and every price change gets a written change order before work happens, because an allowance that isn’t on paper is a surprise waiting for a date. The finished job is backed by our written 90-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
You can safely check a few things yourself. Note the label code on the glass, measure the rough opening, look for condensation inside the panes, and watch for sill staining after rain. Write it all down; that information saves time on the first call.
Where DIY goes wrong is in the removal and re-seating of the window itself, and in the kitchen work that surrounds it. Windows are heavy, the frames are set into structural openings, and getting the flashing wrong at the sill is what rots trim over the next wet winter. Ladders and second-story work are not a solo job. Cabinet installs, countertop cuts, and gas or electrical changes in a kitchen remodel are areas to leave to licensed trades; we don’t hand you a tutorial for those, we handle them with permits pulled.
Call (844) 320-2945 and we’ll set up a free estimate. A live person answers the phone, day or night.
FAQs

Plan on 15 to 20 years for the window unit itself, with hardware and weatherstripping the first things to go. Coastal salt air and kitchen moisture shorten that on the ocean side of the house. If you’re seeing condensation inside the glass or sill staining, the unit is past saving and should be replaced.
Sometimes. Hardware, weatherstripping, and perimeter seals can often be repaired or replaced on their own, and that’s the cheapest path when the frame and glazing are sound. Once the insulated glass seal fails or the frame has deflected, replacement is the honest answer. We’ll tell you which case you’re in, and if it’s a repair, we do the repair.
A window or slider swap is one to two days once the part is in hand. A full kitchen remodel runs weeks, and we give you the schedule in writing at the start, not a promise on the fly. Weather, permit inspection timing, and material lead times move the finish date a few days either way.
We read the label code and measurements on your actual window, then match to OEM or a quality aftermarket equivalent that fits that frame. We don’t claim to stock ES Windows parts or carry them on a truck; the part is sourced to your unit, and we tell you exactly which part is going in before we order it. Call (844) 320-2945 for a free estimate.
Get Your Free Estimate
If you’ve got an ES Windows kitchen that’s due for a rebuild or a failing unit you want matched correctly, call Barrett & Sons Construction Huntington Beach at (844) 320-2945. We’ll come out, measure, and give you a written estimate with the scope, the allowances, and the price spelled out. We won’t tell you what you want to hear about the timeline, but you’ll know exactly what’s happening before a nail moves. Every price change arrives in writing first, and the 90-Day Done Right Promise is on the contract, not in fine print.
Written by the team at Barrett & Sons Construction Huntington Beach, serving Huntington Beach and nearby areas.












