A Barrett company - serving Huntington Beach, CA
A backyard with a new horizontal privacy fence
Jerith · Huntington Beach

Jerith Fence Installation in Huntington Beach, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Huntington Beach
A new black aluminum pool fence with a gate
A new wood side gate with black hardware
A finished backyard cottage with a small covered porch
A new roof with clean valleys and new flashing
A new multi-panel patio door opening a kitchen to the patio
A new paver patio with a seat wall and fire pit
A remodeled primary bathroom with a soaking tub and walk-in shower
A single-story rear room addition with tall windows and a new patio
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Jerith Fence Installation: The Huntington Beach Owner’s Guide

Jerith aluminum fence installation in Huntington Beach typically runs $3,500 to $9,000 for a standard residential run, and most job walks happen within a few days of your call. We install and repair Jerith lines across the city, from the salt-air blocks near the pier to inland tracts off Beach Boulevard. Huntington Beach homeowners usually call us after a windstorm knocks a post loose, a gate starts dragging, or a section near the property line sags after a sprinkler leak. Others spot the problem during a home inspection. Either way, the fix is rarely the whole fence; it’s usually the post footing, a hinge, or a specific panel section.

Call (844) 320-2945

Which Jerith Models This Applies To

A new stained cedar privacy fence

Jerith builds residential aluminum fence in several recognizable lines, and the part that fits one won’t always fit another. The most common Huntington Beach installs are the Classic, Madison, and Traditional styles, plus the picket and ornamental series that show up in newer developments. Before we order anything, we confirm which series you have. The model tag is usually spot-welded inside a post or stamped on the bottom rail near a gate hinge. If the tag is gone, we measure the picket spacing (usually 3-3/4″ to 4-7/8″ depending on the line) and the rail height, and we match the profile by eye against known Jerith extrusions.

The OEM-versus-aftermarket call matters with Jerith because the company’s extrusions carry a specific wall thickness and finish, and a generic aluminum post cap or hinge won’t always seat right. Jerith parts are powder-coated and the color codes are consistent across runs, so a factory part matches your existing fence without a visible patch. Aftermarket brackets may fit the hole but sit proud or corrode faster in salt air. We order OEM where it’s available and tell you plainly when a compatible equivalent is the better call. We’re an independent service provider, not affiliated with Jerith.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Jerith Fence Installation Is Failing

Most Jerith fence problems start small and get worse in the coastal air. Watch for these:

  • A post that rocks when you push it. The concrete footing has cracked or shrunk away from the post. In Huntington Beach, sandy soil and irrigation leaks are the usual culprits.
  • A gate that drags or won’t latch. The hinge pin has worn, or the post has shifted. It’s usually a hinge or footing issue, not a gate panel problem.
  • Loose pickets or rattle in the wind. The picket retaining screws or rivets have backed out. Aluminum expands and contracts in the sun, which works fasteners loose over the years.
  • White chalky streaks or pitting on the finish. Salt air has started to break down the powder coat, usually near the bottom rail where dew sits longest.
  • Rust-colored stains at the welds. The finish has failed at a joint. Catching this early means a repair; ignoring it means a panel replacement.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Jerith fence installation in Huntington Beach runs $3,500 to $9,000 installed for a typical residential run. A single-panel repair or hinge replacement on an existing Jerith line is a much smaller job and priced separately after we see the damage. The range is driven by linear footage, gate count, whether the old footing has to be dug out and repoured, and whether you’re matching a discontinued powder-coat color. Every quote is written line by line: parts, labor, footing, and disposal, with any price change arriving as a written change order before work starts. We back the install with our written 90-Day Done Right Promise.

DIY or Call Us?

You can safely check a few things yourself: push each post to see if it moves, look for stripped fasteners, and read the model tag. What goes wrong with DIY on this job is the footing. An aluminum fence post set in the wrong concrete depth or without proper drainage fails again within a season in our sandy soil, and matching a discontinued Jerith powder coat by eye almost never works. Most owners call us after a first repair attempt. Call (844) 320-2945 to schedule a free estimate, and we’ll tell you whether it’s a fix or a replacement.

FAQs

A new front entry door with glass sidelights

How long does a Jerith aluminum fence last in Huntington Beach?
A Jerith aluminum fence typically holds up 20 to 30 years here, with the powder coat being the first thing to go in salt air. Washing it down twice a year extends that finish considerably.

Can a failing Jerith section be repaired instead of replaced?
Yes, in most cases. A rocking post, a dragging gate, or a loose picket is a repair, and it costs a fraction of a new run. We’ll tell you honestly when repair stops making sense.

How long does a panel or post swap take?
A single panel or post swap is usually a half-day job once the part is in hand. A full run takes one to three days depending on footage and footing work.

How do you source the right Jerith part?
We confirm your model series from the tag or by measuring the profile, then order the matching OEM part. If a factory part is discontinued, we quote a compatible equivalent and show you the difference before you decide. Call (844) 320-2945 for an exact quote; estimates are free.

Barrett & Sons Construction Huntington Beach is an independent service provider. We install and repair Jerith fence lines and also work with KraftMaid, Cambria, and Silestone on the kitchen and bath side of our business. Call (844) 320-2945 to schedule your free estimate.

Written by the team at Barrett & Sons Construction Huntington Beach, serving Huntington Beach and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
New painted shaker cabinets with an organized deep drawerA remodeled hall bathroom with patterned floor tile and painted wallsA remodeled kitchen with a waterfall island and wood cabinetsA wood double vanity with two mirrors after a bathroom remodelA newly finished roof with a ridge vent and step flashingA galley kitchen opened up to the dining room with a new peninsula

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Barrett in Huntington Beach

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Huntington Beach team

A local vetted partner works across Huntington Beach and the towns around it, to the same written standard as every Barrett job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-2945
Local Service Coverage

Request a Free Estimate in Huntington Beach

Tell us what you need - Barrett & Sons Construction Huntington Beach responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch