







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Kitchen Remodeling: The Huntington Beach Owner’s Guide
If you have a Barrette product in your kitchen that’s failing, the good news is that replacement is usually straightforward: installed Barrette-compatible kitchen remodeling work in Huntington Beach typically runs $14,000 – $45,000 depending on scope, and most parts-and-labor swaps can be scheduled within a few days rather than weeks. Barrette cabinetry and components are generally well-made, but they don’t last forever in coastal Orange County air. Owners usually discover a failure slowly – a drawer that stops gliding smoothly, a door that won’t stay shut, a hinge that sags no matter how many times you tighten it, or a cabinet frame that’s started to swell near the sink. When one Barrette component goes, the rest of the kitchen usually tells you it’s the same age.
Which Barrette Models This Applies To
Barrette manufactures several cabinet and storage lines, and the parts are not interchangeable between them. Barrette’s door and drawer fronts generally fall into a handful of standard width profiles, but hinge patterns, drawer glide spacing, and shelf-pin bore diameters vary by series and by year of manufacture. The practical way to identify what you have is to pull one drawer completely out and look for the manufacturer label stuck to the back or underside of the drawer box, then measure the actual drawer box width and the glide mounting screw pattern. If there’s no label, measure the opening and photograph the existing hinge or glide. From there, you have a choice: an OEM Barrette replacement, which guarantees a match but can be slow to source and costly, or a quality aftermarket glide or hinge from a brand like Blum or Grass, which often exceeds the original’s durability and costs less. For most Huntington Beach owners, aftermarket hardware is the better call when the cabinet frame itself is sound.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Barrette Kitchen Remodeling Is Failing
- A drawer that won’t glide smoothly or pulls unevenly. The glide rollers or the track have worn, or the drawer box has warped from humidity. Coastal Huntington Beach air is hard on wood drawer boxes, and a warped box will keep binding until it’s replaced.
- A door that sags or won’t stay closed. The hinge has loosened in the cabinet frame, which means the screw holes have stripped. That’s a real repair, not a tightening job – the holes usually need to be filled and re-drilled.
- A hinge that squeaks, sticks, or snaps at the fold. The internal spring or the cam has worn out. Once a European-style concealed hinge starts snapping, it’s done – no amount of lubricant will fix it.
- A cabinet panel that swells or delaminates near the sink or dishwasher. Moisture has gotten into the substrate. This is a replacement, not a repair, and it’s common in Huntington Beach kitchens where the sink has had a slow leak for a season or two.
- A soft-close mechanism that slams or won’t latch. The damper has failed, which usually means the whole hinge needs swapping rather than the mechanism alone.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing in Huntington Beach for Barrette-related kitchen work runs $14,000 – $45,000 for a full kitchen remodel, $4,000 – $13,000 for cabinet installation alone, and $800 – $3,000 for a single vanity replacement. What drives the range is how much of the original kitchen is salvageable. Replacing a handful of hinges and glides is at the bottom of that range; replacing cabinet boxes, doors, drawer fronts, and re-hanging everything is at the top. We install KraftMaid cabinets and Cambria countertops when the original Barrette components are beyond repair, and we also service Silestone and Cambria surfaces. What’s included: the hardware or cabinet components, the removal of the old part, the install, and a written 90-Day Done Right Promise on the labor. Permits are pulled where they’re required for the scope, and no price changes without a written change order in your hands first.
DIY or Call Us?
Anyone can safely tighten a hinge screw, wipe down a glide track, or check whether a cabinet door is level. What’s not safe or wise to DIY is re-drilling a cabinet frame to re-seat a hinge – if you get that hole off by a millimeter, you’ve ruined the door alignment and possibly the cabinet face. The same goes for replacing under-sink cabinet panels with water damage; there’s often soft, failing material you can’t see until you cut it open. We’ve watched Huntington Beach homeowners turn a $30 hinge swap into a $900 cabinet repair by forcing a screw into stripped wood. Call us before you drill, and we’ll tell you honestly whether it’s a five-minute fix or worth scheduling. Our technicians have up to 28 years of experience, and the crew that shows up is background-checked and carries the Barrett & Sons name.
FAQs

Most Barrette hinges and glides last 10 to 15 years in normal kitchen use. In coastal Huntington Beach, where the salt air and humidity are harder on the metal, expect the lower end of that range, and expect glides to be the first thing to wear out on a drawer that’s used daily. If your kitchen is older than 12 years and you’re seeing one failure, the rest are usually close behind. Call (844) 320-2945 for an exact quote – estimates are free.
Sometimes – a stripped hinge screw hole can be filled and re-drilled, and a glide can be cleaned and re-aligned. But once a concealed hinge’s internal spring has failed, or a drawer box has swollen, there’s no repair that lasts. We’ll tell you which category you’re in when we look at it, and we won’t sell you a replacement you don’t need.
A single hinge or glide set is typically a 30-to-60-minute job once the right part is on site. A full set of drawer glides for a kitchen runs a half day. A cabinet panel replacement is usually a full day, depending on how much of the sink or dishwasher plumbing has to be disconnected and reconnected.
We identify the exact series from the label or measurements, then source the OEM component or a matched aftermarket equivalent from a supplier who stocks the correct spec. For most Huntington Beach jobs we recommend the aftermarket hardware backed by a known manufacturer warranty, because it holds up better in coastal humidity and you’ll have documentation if it ever fails.
Permits are pulled wherever the scope requires them – cabinet replacement alone usually doesn’t trigger a permit, but moving plumbing, electrical, or gas lines does. Every eligible job gets the permit pulled and the inspection signed. If you’ve heard “permits are optional,” that’s not how we work, and it’s not how the City of Huntington Beach works either.
No surprises. Any scope change or allowance update arrives in writing as a change order before we touch the job. An allowance that isn’t on paper is a surprise waiting for a date, and we don’t do that.
We also service KraftMaid, Cambria, and Silestone products on kitchen jobs across Huntington Beach. Barrett & Sons Construction Huntington Beach is an independent service provider and is not affiliated with Barrette.
If you’re ready for an honest look at what’s failing and what it’ll cost to fix, call (844) 320-2945 to schedule your free estimate. You’ll get a written line-item quote, a real person on the phone 24/7, and a price that doesn’t move once the work begins.
Written by the team at Barrett & Sons Construction Huntington Beach, serving Huntington Beach and nearby areas.












