







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Home Additions & ADU: The Huntington Beach Owner’s Guide
We install Boral-compatible home additions and ADUs in Huntington Beach, and the installed cost runs $45,000 – $130,000 for a home addition and $90,000 – $220,000 for a detached or attached ADU, depending on square footage, foundation type, and finish level. These are planned builds, not same-day work, so we quote them accurately rather than quickly. Most Huntington Beach owners don’t “discover a failed part” the way you’d find a broken garage spring; they discover a failing plan. A previous builder left out the foundation design, the permit lapsed, the ADU was drawn to the wrong setback for the lot, or the room addition was framed without a shear wall that satisfies the city inspector. That’s usually when we get the call.
Which Boral Models This Applies To

Boral’s building products line reaches Huntington Beach projects in a few ways, and knowing which one sits on your project changes what we’re matching. Boral manufactures clay and concrete roof tile (the Marseille, Saxony 900, and flat-profile concrete lines are the common ones on coastal California homes), plus trim and cladding pieces used on additions where the new structure has to blend with the existing house. On an ADU, tile and trim compatibility matter most: the new roofline has to read as part of the original house from the street, and the city plan checker will compare the two.
Here’s the compatibility gotcha worth checking before you order anything. Boral’s underslab and trim schedules use manufacturer part codes that map to a specific profile and finish, not to a generic “tile” or “trim.” Two profiles that look identical from ten feet away can have different lap dimensions, and a trim piece spec’d for a different Boral series won’t align with the existing lap on your Huntington Beach addition. If your plan set shows a Boral profile code, write it down and keep it with the drawings. An OEM part matched to that code is the safe call. A quality aftermarket equivalent can work, but only when the profile dimensions match and your inspector approves the substitution in writing. We use Boral only where it’s specified; we also work in KraftMaid, Cambria, and Silestone on the interior side of an addition.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Home Additions & ADU Is Failing
- Tile slipping or lifting on the new addition’s roof. On a Huntington Beach structure facing the marine layer, wind-driven moisture works under improperly fastened tile, and the underlayment degrades long before the tile itself does. If you see tile out of line, the underlayment and fastening are the real question.
- Roofline that doesn’t match the original house. A builder who spec’d a different-by-a-hair Boral profile leaves a visible step at the intersection. This shows up in the plan-check phase or, worse, at the first resale inspection.
- Trim gaps or paint failure at the addition seam. A cladding piece cut from the wrong Boral series won’t seal against the existing wall, and moisture finds that gap within a season on a coastal lot.
- Foundation and slab questions the plan set can’t answer. If your drawings don’t show the footing and shear details the Huntington Beach building department will ask about, the project isn’t ready to permit. That’s a “failing plan,” and it stalls before anyone breaks ground.
- Permit lapsed or never pulled. We hear the same story in Huntington Beach: the last contractor said permits weren’t necessary. An unpermitted addition or ADU is a problem you inherit and pay to correct.
Replacement Cost & What’s Included

Installed pricing for a home addition in Huntington Beach runs $45,000 – $130,000. A full ADU runs $90,000 – $220,000, and a garage conversion (often the fastest path to a rentable unit) runs $30,000 – $80,000. What drives the range: square footage, whether you build on a slab or need a raised foundation, the roof tile and cladding you select, window package, and the finish level inside. ADUs also carry site work (utilities, grading, separate metering) that a simple addition doesn’t.
Parts and labor are itemized on the written estimate. Every allowance is on paper before work begins, because an allowance that isn’t on paper is a surprise waiting for a date. Permits get pulled and inspections signed on every eligible job, and every price change arrives as a written change order before it touches the build. The work comes with a written 90-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
What you can safely check yourself: photograph the profile code on any existing Boral tile or trim, pull your plan set and confirm the spec matches, measure the addition footprint, and look up your lot’s setback and lot-coverage limits on the city’s records. Reading and comparing is free and it protects you.
What you shouldn’t do yourself: structural framing, foundation and slab work, shear wall design, and anything that goes on the roof. A two-story addition or a roof intersection is a fall hazard and a code hazard, and structural mistakes are expensive to unwind. A licensed contractor needs to carry that work, and the permit inspector who checks it works for you, not us.
If the drawings don’t match your Boral spec, or a prior builder left you with an open permit, call us at (844) 320-2945. The free second opinion on any written estimate will tell you where the gap is before you spend.
FAQs

How long does a Boral-clad addition or ADU last in Huntington Beach’s climate? A properly installed Boral roof tile system holds up for decades even in the marine-layer air that eats other materials alive, but that lifespan depends on the underlayment and fastening beneath it. The tile outlasts the paper under it. The underlayment is the piece to check on an existing roof.
Can a failing part be repaired instead of replaced? Often yes. Slipped or damaged tile on an addition can usually be reset or matched if the profile is still available and the underlayment underneath is sound. Trim gaps can be corrected with a properly matched piece. What can’t be “repaired” is an addition built without a permit or a foundation detail that fails a plan check; those need real work. Call (844) 320-2945 and we’ll tell you honestly which category you’re in, free.
How long does the replacement take? A tile or trim correction on an existing addition is usually a short job measured in days. A full home addition or ADU is a months-long build, and we give you a realistic written schedule rather than a number that sounds good on the phone. The estimate will tell you what’s genuinely fast and what isn’t.
How do you source the part? We don’t claim to stock Boral parts or carry them on a truck. We identify the profile code from your plan set or your existing roof, order the matched product, and verify it against the specification before installation. If the correct Boral part is discontinued or back-ordered, we present a written substitution for your approval.
For an exact quote on your Huntington Beach project, call (844) 320-2945. Estimates are free.
Schedule Your Free Estimate
Barrett & Sons Construction Huntington Beach is an independent construction company, not affiliated with Boral. We’re owner-operated, and a live person answers our phone around the clock. We pull every permit, put every scope and allowance in writing before work starts, and answer our own calls when something needs a second look.
Call (844) 320-2945 to schedule your free estimate in Huntington Beach.
Written by the team at Barrett & Sons Construction Huntington Beach, serving Huntington Beach and nearby areas.












