







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Boral Roofing: The Huntington Beach Owner’s Guide
Boral makes concrete and clay roof tiles, and in Huntington Beach those tiles sit through salt air, marine fog, and winter wind off the water. A tile repair on a Boral roof typically runs $600 – $2,500, and a full roof replacement runs $8,000 – $20,000 depending on tile, pitch, and square count. We install and repair Boral-compatible roofing across Huntington Beach and pull every permit the job requires. The failed part is usually a cracked field tile, a slipped hip or ridge cap, a rusted underlayment nail, or a flashing piece that let go at a wall or valley. Owners tend to find it the same way: a tile on the lawn after a windy night, a brown stain on the ceiling, or a roofer who said “you need a whole new roof” without showing them the cracked tile.
Which Boral Models This Applies To

Boral’s California line covers a lot of ground, and matching the right part starts with identifying what you actually have. The most common tile on Huntington Beach homes is Saxony 900, a flat concrete interlocking tile used heavily in 1980s and 1990s tract construction. Also common are the Barcelona 900 and Barcelona 700 (a high-profile barrel-style tile), the Madera 700 (a low-profile barrel), and the Villa and Capistrano lines. Ridge and hip caps are sold under their own names and don’t always match the field tile brand, which is where a lot of Huntington Beach re-roofs go wrong: someone pulls a field tile that matches, installs a cap that doesn’t, and the roofline reads crooked from the street.
How to identify yours: pull one intact tile (carefully, from a corner, and only if you’re comfortable on the roof), and read the stamp on the underside. Boral tiles are usually stamped with the model and a color code. If there’s no stamp, measure the tile width and the exposure (the visible length after overlap) – Saxony runs around 12 inches wide with a 10- to 12-inch exposure depending on pitch, while Barcelona barrels are wider and channeled. Photograph it, measure it, and bring the numbers to us. On the OEM-versus-aftermarket question: we source genuine Boral tiles when the model is still in production, and we’ll tell you plainly when a discontinued color means an exact match isn’t available. In that case a close-match tile on a side or back slope is often smarter than re-roofing a whole plane. Barrett & Sons Construction Huntington Beach is an independent service provider and is not affiliated with Boral – which means we have no reason to sell you a Boral part you don’t need.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Boral Roofing Is Failing
- Cracked or shattered field tiles. Usually a hairline crack from thermal cycling or a dropped limb that got worse over two or three winters. Once cracked, the tile is no longer shedding water; it’s just decorative.
- Slipped or missing hip and ridge caps. In Huntington Beach, wind off the coast works the mortar joint at hip and ridge caps loose. When the cap lifts, the underlayment underneath is exposed to sun and rain.
- Granule-like grit or sand in gutters, or chalky dust on the tile. That’s surface wear on a concrete tile – cosmetic on a young roof, a sign the tile is near the end of its service life on an old one.
- Stains on the ceiling or attic sheathing. Almost always the underlayment or a flashing failure, not the tile itself. A cracked tile lets water in, but the felt underneath is what actually keeps the roof dry, and it has a lifespan.
- Rust streaks or popped nails near the ridge. A rusty nail head means water has been sitting under the tile for a while. That’s a flashing or underlayment issue and worth a look before it reaches the drywall.
If you’re seeing two or more of these, it’s worth a second opinion before you sign anything for a full re-roof.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what tile work runs in Huntington Beach, installed, with the part and labor together:
- Tile roof repair (field tiles, flashing, caps): $600 – $2,500
- Roof repair, general (flashings, small leak chasing): $400 – $1,800
- Full roof replacement (Boral-compatible tile): $8,000 – $20,000
- Metal roof installation (if you’re considering a switch): $15,000 – $40,000
The range is driven by how many squares we’re covering, the tile profile, how steep the pitch is (a steep Huntington Beach roof takes more time and more safety rigging), and whether the underlayment needs replacing under the tile. Tile work is not something we hand off in an afternoon – a proper repair means pulling the surrounding tiles without breaking them, replacing the failed part, re-setting the flashing, and re-bedding the cap so it doesn’t leak next winter. Parts and labor are itemized on the written estimate, not lumped into one number. Every price change arrives as a written change order before we touch the roof. Our technicians have up to 28 years of experience, and every completed job is backed by our 90-Day Done Right Promise.
DIY or Call Us?
You can safely check a lot from the ground: a cracked tile you can see from the driveway, a missing cap, grit in the gutter, a stain on the ceiling. Use binoculars, take photos, write down what you see. What we’d steer you away from is walking a tile roof yourself. Concrete tile is heavy and brittle – a misstep cracks the tile you’re standing on, and a steep Huntington Beach roof with morning fog on it is slick. Broken tiles underfoot are the most common DIY injury we see, and a fall from roof height is worse than any repair bill. Beyond safety, tile work is easy to get wrong in a way that doesn’t show up for months: bed a cap in the wrong mortar, skip the underlayment patch, and you’ve got a leak you’ll chase all next winter.
The honest split: check and photograph from the ground, and call us for anything that involves getting on the roof. Call (844) 320-2945 and we’ll come look, give you a straight answer, and a written estimate at no charge.
FAQs

How long does Boral tile roofing last in Huntington Beach?
A Boral concrete tile roof typically lasts 40 to 50 years, and clay tile can go longer, but the tiles outlast the underlayment underneath them. In Huntington Beach’s salt air and marine fog, the underlayment is often the thing that fails first at 20 to 25 years, long before the tile itself. If your tile looks fine but you’re seeing ceiling stains, the tile may have decades left and the underlayment is what needs attention. Call (844) 320-2945 for an honest read on which one you’re dealing with – the estimate is free.
Can a cracked or missing Boral tile be repaired instead of replaced?
Yes, and it usually should be – a single cracked field tile or a lifted ridge cap is a repair, not a re-roof. We pull the surrounding tiles without breaking them, match the replacement to your model and color, re-set the flashing, and re-bed the cap. The only time a repair stops making sense is when the underlayment is failing under a whole plane, or the color is discontinued and a match isn’t possible. Call (844) 320-2945 and we’ll tell you which side of that line your roof is on.
How long does the swap take?
A single-tile or small flashing repair is typically a partial-day job once we’re on site, and a multi-tile repair across a plane usually runs one to two days. A full Boral tile replacement is measured in weeks, not hours, and we’ll give you a written schedule before we start. The reason tile repairs take longer than people expect is that pulling and re-setting surrounding tiles without cracking them is careful work, and rushing it is how leaks happen. Call (844) 320-2945 and we’ll give you a realistic timeline for your roof.
How do you source the Boral part?
We source genuine Boral tiles through supplier channels when the model is still in production, matching the model, profile, and color code off the stamp on your tile. When a color or model is discontinued, we’ll tell you upfront and walk you through close-match options, including consolidating the mismatch onto a side or back slope where it won’t be seen from the street. We don’t carry parts on a truck and we don’t keep a local stock – we order the part to match your roof, which is why a proper measurement and photo matter. Call (844) 320-2945 to start the identification, and estimates are free.
We also install premium brands across the other trades we handle in Huntington Beach – KraftMaid, Cambria, and Silestone – when a roof project turns into a bigger renovation. If you’ve been handed a written estimate elsewhere and something doesn’t add up, take us up on our Free Second Opinion on Any Written Estimate, or our $40 Off Any Repair Over $200. We have No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount stands on every job. Call (844) 320-2945 for a free estimate on your Boral roofing repair or replacement in Huntington Beach.
Written by the team at Barrett & Sons Construction Huntington Beach, serving Huntington Beach and nearby areas.












