A Barrett company - serving Huntington Beach, CA
A remodeled kitchen with a wood island, painted cabinets and a plaster range hood
Cambria · Huntington Beach

Cambria Roofing in Huntington Beach, CA

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Huntington Beach
A stone counter, tile backsplash and open shelf after a kitchen remodel
New painted shaker cabinets with an organized deep drawer
A remodeled kitchen with a waterfall island and wood cabinets
A new curved paver walkway to the front porch
A walk-in shower with large-format tile and a built-in niche
A remodeled family room with new windows and a window seat
A standing-seam metal roof over a covered porch
A new bay window with a cushioned seat
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Cambria Roofing: The Huntington Beach Owner’s Guide

Cambria is engineered quartz, not a roofing material, so when a Huntington Beach homeowner searches “Cambria roofing,” what they almost always mean is Cambria quartz that’s failing around a roof-adjacent detail: a kitchen or bath remodel where stone meets a vented skylight, a curb, or a flashing transition. If your Cambria surface is cracked, stained, or separating near a roof penetration, repair in Huntington Beach typically runs $400 – $1,800, and a full roof replacement behind a leak runs $8,000 – $20,000.

Call (844) 320-2945

Owners usually find the problem the same way. A brown ring appears on the ceiling below a skylight. A hairline crack opens along the countertop edge where a vent pipe passes through. Or the stone pulls away from the wall because water has been working behind a flashing that was never tied in correctly when the roof went on.

  • Cambria countertops: non-porous quartz, best matched to a full slab, backed by a manufacturer warranty
  • Roof penetrations feeding a Cambria surface: skylight curbs, vent stacks, chimney flashing
  • Most common scenario in Huntington Beach: coastal moisture + a flashing detail that was never watertight, discovered years later inside the kitchen
  • Skill level: diagnosis is not a homeowner job. Flashing and roof work belong to a trained crew.

One thing to know up front: we’re an independent service provider, not affiliated with Cambria. We install Cambria quartz and the GAF and CertainTeed roofing systems that sit above and around it, and we’ll tell you straight whether the stone or the roofing detail needs attention first.

Which Cambria Models This Applies To

Installers leveling a new base cabinet during a kitchen remodel

Cambria quartz is sold by design line, not model number, so the “part” isn’t a serial number on a box. The relevant detail is the slab color, the thickness (2 cm or 3 cm), and the edge profile, all of which live on the fabrication paperwork from your original install. If that paperwork is gone, look for the Cambria stamp and design name etched or stamped on the underside of the overhang.

On the roofing side, the parts that pair with a Cambria surface are the penetration flashings: skylight curb flashing, step flashing at a wall transition, and pipe boots where a vent stack exits. Cambria holds up well to moisture, but the stone won’t save a flashing that fails behind it. In Huntington Beach, salt air and winter storms wear on the metal flashings, not the quartz. Galvanized boots rust through faster than you’d expect near the coast; a quality aftermarket lead or copper flashing outlasts an OEM galvanized one in this climate. That’s the real OEM-versus-aftermarket decision, and it’s about the roofing hardware, not the Cambria.

Measure the penetration opening and note the pipe or curb diameter before you order anything. A boot sized for a 2-inch stack won’t seal a 3-inch one, and the gap is where water gets in.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Cambria Roofing Is Failing

The symptoms below are what Huntington Beach owners describe to us when a Cambria surface and a roof detail are both involved. Each points to something specific.

  • Water staining on the ceiling near a skylight: the curb flashing or the sealant under it has failed, and water has been dripping behind the drywall for a while.
  • A crack radiating from a corner of the Cambria slab near an exterior wall: the wall or curb behind the stone has shifted, often because a flashing leak rotted the substrate.
  • Dark streaks or blistering paint on the wall above the countertop: moisture is trapped behind the wall finish, a classic sign that a vent boot or step flashing has let water in.
  • Damp or soft drywall under a skylight: the flashing is failing at the top edge where roof plane meets curb, and this one usually worsens through our wet season.
  • Rust stains on the stone at a pipe penetration: the old galvanized boot is corroded, which means it’s near the end of its life even if it hasn’t leaked yet.

Two or more of these together usually means the roofing detail needs to be corrected before the Cambria surface is touched again.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled hall bathroom with patterned floor tile and painted walls

Here’s what Huntington Beach homeowners are actually paying for this kind of work, with the Cambria surface and the roofing detail priced separately so you can see where the money goes.

Work Typical Installed Range What Drives the Number
Roof repair (flashing, boot, localized leak) $400 – $1,800 Number of penetrations, access, whether drywall needs opening
Tile roof repair $600 – $2,500 Matching tile, extent of underlayment damage
Full roof replacement $8,000 – $20,000 Roof size, pitch, material, tear-off
Countertop installation (Cambria) $2,000 – $6,500 Square footage, edge profile, cutouts, thickness
Backsplash installation $800 – $2,500 Material, pattern, linear feet

The range moves on things you’d expect: how many penetrations, whether the flashings can be fixed from outside or need drywall opened, and whether you’re matching an existing Cambria design or replacing it. Every scope comes in writing before we start. If the job turns up a rotted substrate that nobody could see from the roof, that change arrives as a written change order before we touch it, not as a surprise invoice at the end.

All work is backed by the 90-Day Done Right Promise, and permits are pulled and inspections signed on every eligible job.

DIY or Call Us?

Some diagnosis is safe for a homeowner. You can look for a ceiling stain, note the color and thickness on the Cambria paperwork, and check a pipe boot from the ground with binoculars. What we don’t recommend is climbing onto a Huntington Beach roof to seal or replace flashing yourself. Flashings are set under the courses above them, the work is on a pitched surface, and a bad seal you can’t see from the ground is how a small leak becomes a rotted kitchen wall.

Cracks in the Cambria surface should stay untouched too. Patching quartz at a leak point traps moisture and rarely matches. Diagnosis is the whole game here: a trained crew reads the flashing, determines whether the stone is actually the problem or just the victim of a roof detail, and gives you a written scope and line-item quote before starting. That’s our approach on every Cambria and roofing job in Huntington Beach, and it’s backed by experienced crew members (up to 28 years) who’ve worked in coastal conditions.

Call (844) 320-2945 and a live person answers, day or night. While you’re at it, mention the $40 Off Any Repair Over $200 and the permanent 10% Senior & Veteran discount.

FAQs

A wood double vanity with two mirrors after a bathroom remodel

How long does a Cambria countertop last, and what about the roof above it?
Cambria quartz is engineered for the long haul with proper care, and it’s non-porous so it holds up to moisture and staining. The roof flashing around it is the vulnerable part. In Huntington Beach’s coastal air, galvanized flashings corrode faster than inland, so expect to inspect roof penetrations every few years. Call (844) 320-2945 for a free second opinion on any written estimate about whether the stone or the flashing is failing.

Can this be repaired instead of replaced?
Often yes. If the leak is a failed flashing or pipe boot, a localized roofing repair (typically $400 – $1,800) fixes it without touching the Cambria. If the quartz itself is cracked or separating from a rotted substrate, that substrate has to be fixed and the slab may need replacement. We’ll tell you which before we start. Estimates are free; call (844) 320-2945.

How long does the swap take?
A localized flashing or boot repair is usually a same-day job once we’re on site. A full slab replacement or a roof replacement takes longer, depending on scope and permit timing. Every job gets a written lead time up front so you’re not guessing. Call (844) 320-2945 to schedule your free estimate.

Do you source the Cambria part yourselves?
Yes. We route Cambria slab fabrication through our supplier and specify the roofing flashings (lead, copper, or quality aftermarket boots) to suit the penetration and the coast’s conditions. We don’t carry parts on a truck; everything is sourced and matched to your job. We also service KraftMaid, Silestone, and Kohler if you’re touching the whole kitchen. Call (844) 320-2945 for an exact quote on parts and labor together.

If you’re in Huntington Beach and a brown ring on the ceiling sent you searching, call Barrett & Sons Construction Huntington Beach at (844) 320-2945 for a free estimate. We pull the permits, put the price in writing, and back the work with the 90-Day Done Right Promise.

Written by the team at Barrett & Sons Construction Huntington Beach, serving Huntington Beach and nearby areas.

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new black aluminum pool fence with a gateA new wood side gate with black hardwareA new concrete driveway with a paver borderA remodeled hall bathroom with subway tile and a floating vanityA garage converted into a guest room and home officeNew architectural shingles with a clean valley

Explore more projects

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Barrett in Huntington Beach

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Huntington Beach team

A local vetted partner works across Huntington Beach and the towns around it, to the same written standard as every Barrett job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 320-2945
Local Service Coverage

Request a Free Estimate in Huntington Beach

Tell us what you need - Barrett & Sons Construction Huntington Beach responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch