







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Kitchen Remodeling: The Huntington Beach Owner’s Guide
CGI kitchen remodeling in Huntington Beach typically runs $14,000 – $45,000 installed, depending on cabinet layout, counter selections, and whether the scope is a full gut or a cabinet-and-counter refresh. We install and coordinate CGI-compatible products – cabinets, doors, drawer fronts, hardware, and trim – for kitchens across Huntington Beach, and we quote the parts and labor as separate line items so you see exactly what you’re paying for. Most owners don’t discover a failing CGI component all at once. It starts with a door that won’t sit flush, a drawer that drags near the dishwasher, or a hinge screw that spins instead of biting. One small annoyance becomes two, and by the time you’re pricing replacements you’ve already lived with it for a season.
Key Takeaways
- Installed CGI kitchen remodeling in Huntington Beach: $14,000 – $45,000.
- Cabinet boxes and door fronts usually outlast hinges, slides, and hardware by years – those small parts fail first.
- We’re an independent contractor and not affiliated with CGI; we source compatible parts and install them.
- Every eligible job gets permits pulled and inspections signed, and every price change arrives as a written change order first.
Which CGI Models This Applies To

CGI products show up in kitchens in a handful of ways, and the part you need depends on which one you own. Cabinet lines differ by series and by door style, and the hinge and slide patterns inside those boxes aren’t universal. So the first job is identification, not ordering.
The label is the place to start. Look inside the cabinet box on the back panel, on the underside of a drawer, or on the door’s interior edge. Most CGI labels list a series number, a door style code, and a finish code. Write all three down. Then measure the actual opening – hinge cup boring diameter (35mm is common but not guaranteed), slide length, drawer box height, and door overlay. Photos with a tape measure laid flat beside the part save a return trip.
On the OEM-versus-aftermarket question: for hinges and slides, a quality aftermarket equivalent that matches the boring pattern and load rating will do the job and often costs less than an OEM replacement. For door fronts, drawer fronts, and anything where the finish has to match the rest of the run, go OEM or expect a visible mismatch under Huntington Beach afternoon light. That’s the honest split.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your CGI Kitchen Remodeling Is Failing
These are the failures we see most often when we’re called out to look at a CGI kitchen in Huntington Beach. Each one has a cause worth knowing before you spend money.
- Doors sagging or rubbing at the corner. The hinge screws have stripped out of the cabinet stile, or the hinge itself has lost tension. A stripped screw hole in particleboard won’t hold a new screw without a repair insert – replacing the hinge alone won’t fix it.
- Drawers that bind or won’t close tight. Usually a worn slide, but sometimes a drawer box that’s racked out of square. Check the slide first; if the box is racked, a new slide won’t sit right.
- Soft-close that stopped being soft. The dampener in the hinge or slide has failed. This is a parts swap, not a rebuild – but the replacement has to match the original bore pattern or you’re drilling new holes.
- Finish blistering or peeling near the range or sink. Coastal humidity and steam do this to lower-grade finishes over time. If it’s isolated to a couple of fronts, replace those. If it’s spread across the run, the finish has reached the end of its service life.
- Water staining at the toe kick or under the sink base. Slow leaks swell the cabinet bottom. The staining is the visible part; the swollen board underneath is the real problem, and it’s a box repair, not a door swap.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what our Huntington Beach customers actually pay for CGI-compatible kitchen work, with parts and labor shown as separate lines in the written quote:
| Scope | Installed Range |
|---|---|
| Full kitchen remodel | $14,000 – $45,000 |
| Small kitchen remodel | $9,000 – $20,000 |
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash installation | $800 – $2,500 |
| Kitchen island installation | $3,000 – $10,000 |
What drives the range on a Huntington Beach job: cabinet line and door style, whether the layout moves (plumbing and electrical relocation adds real cost), counter material, and ADA or code-driven clearances. We price parts and labor separately so you can see what a hinge-and-slide refresh costs versus a full cabinet replacement. Every completed job carries our written 90-Day Done Right Promise, and any change to scope or allowance arrives as a written change order before the work happens.
DIY or Call Us?
Some of this is safe to handle yourself. Swapping a drawer slide, replacing a cabinet knob or pull, tightening a hinge screw that still has bite, and cleaning and lubricating tracks are all reasonable weekend work. Measure twice here – the boring pattern on the new part has to match the old one or you’re drilling into a finished door.
Where DIY goes wrong: cabinet removal and reinstall, countertop work, anything touching plumbing or gas lines under the sink or behind the range, and electrical for under-cabinet lighting or a new island outlet. Those aren’t “harder than they look” jobs – they’re jobs where a mistake means water where it shouldn’t be, a gas smell, or a permit problem when you sell. If your CGI kitchen in Huntington Beach needs cabinet work, a water-damaged box repaired, or a layout change, that’s our lane. Call (844) 320-2945 and we’ll give you a free estimate with the parts and labor broken out.
FAQs

Cabinet boxes and door fronts typically hold up well for 20-plus years when they’re kept dry, while hinges, slides, and soft-close mechanisms are the parts that fail first – often in the 8-to-12-year range – especially in kitchens near the coast where humidity swings are harder on hardware. The boxes usually outlast the parts inside them. Call (844) 320-2945 for an exact quote on replacing the failing components – estimates are free.
Often, yes. A stripped hinge screw can be fixed with a repair insert, a single failed slide can be swapped without touching the box, and one bad door front can be matched and replaced if the series and finish code are still available. It’s when the cabinet bottom has swollen from water or the finish has failed across the whole run that replacement makes more sense than repair. We’ll tell you which side of that line you’re on after looking at it. Call (844) 320-2945 to schedule a free estimate.
A hinge or slide replacement on a single cabinet is usually under an hour, and a full kitchen’s worth of hardware can typically be done in a day. Cabinet replacement or a layout change runs longer – we’ll give you the timeline in the written scope so you’re not guessing. Call (844) 320-2945 for a free estimate and a real timeline for your Huntington Beach kitchen.
We identify your series, door style, and finish code from the label and measurements, then source the part through the appropriate channel – OEM where the finish or fit has to match, quality aftermarket equivalents for hardware where the spec is standard. We don’t claim to carry parts on a truck; we order what your kitchen actually needs. If a part is discontinued, we’ll tell you the compatible substitute in writing before anything is ordered. Call (844) 320-2945 for a free estimate.
If you’ve got a CGI kitchen in Huntington Beach with doors that sag, drawers that fight you, or hardware that’s given up, the fastest way to a straight answer is a phone call. We’ll look at it, separate the part cost from the labor, and put it in writing. We also service KraftMaid, Cambria, and Silestone kitchens. Barrett & Sons Construction Huntington Beach is an independent contractor, not affiliated with CGI. Call (844) 320-2945 to schedule your free estimate – we answer the phone with a live person, day or night, and there’s no trip charge inside the county.
Written by the team at Barrett & Sons Construction Huntington Beach, serving Huntington Beach and nearby areas.












