







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in Garden Grove, CA | Barrett & Sons Construction Huntington Beach
We provide independent CGI service across Garden Grove, and the one thing that makes our work here different is this: most of the CGI windows and doors we touch sit in 1950s to 1970s ranch homes where earlier owners already converted the garage, so a simple replacement often turns into a plan-check conversation before we can open a wall. We’re not CGI-affiliated or an authorized dealer. We’re a licensed, insured, owner-operated construction company that knows how this housing stock fails and how Garden Grove’s permit desk reads it. Call (844) 320-2945 and a live person answers, day or night.
Why Garden Grove Residents Choose Us for CGI Service

We’ve spent years working on CGI 2000 Series steel entry doors, CGI vinyl single-hung and slider windows, CGI Series 4000 aluminum sliding glass doors, and CGI 800 Series fiberglass entries. That means we know the failure points before we pull a unit out – the balance shoes, the rollers, the unflashed thresholds – and we order parts that actually fit the original rough opening instead of forcing something close enough.
Garden Grove homeowners between ZIP codes 92840, 92843, 92844, and 92845 have mostly heard the same pitch from the big outfits: a phone quote that mutates into a different invoice. We don’t work that way. Every scope and allowance shows up in writing, and if a price change happens, you see a written change order before a single nail moves. Every eligible job gets permits pulled and inspections signed. And every completed job carries our 90-Day Done Right Promise – one call brings us back to make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in Garden Grove
- Failed balance shoes and tilt latches on vinyl single-hungs. After 10 to 15 years of thermal cycling, sashes on CGI vinyl windows in Garden Grove’s post-war ranch homes start dropping or sealing poorly. The tilt latches loosen, the sash sags, and you feel a draft you can’t quite locate.
- Flat-spotted rollers and pitted tracks on aluminum sliders. South- and west-facing CGI Series 4000 doors take serious solar load, especially during Santa Ana wind events, and the sills show water intrusion where pan flashing never existed.
- Bottom-corner rust and hinge-side rot on steel entries. CGI 2000 Series doors on original slab-on-grade Garden Grove homes rust at the threshold and rot where the stucco-to-threshold detail was never flashed correctly – made worse by fall fire-season dust followed by winter rain.
- Cracked lock bores on fiberglass entries. When the rough opening is out of square – common here because doors were often set before the stucco cured – CGI 800 Series fiberglass doors crack at the lock bore and at the hinge screws.
- Fogged insulated glass units. Failed glazing seals leave a haze between the panes. It’s cosmetic until it isn’t, and it usually shows up in clusters on the same wall of a Garden Grove tract block.
CGI Service in Garden Grove: What Local Conditions Mean for Your Equipment
Here’s the local fact that drives almost every CGI job we look at in Garden Grove: the narrow side yards on these 6,000 to 7,000 square foot post-war lots push homeowners toward rear ADUs and garage conversions instead of side additions. And because so many original garages were converted informally by earlier owners, replacing CGI windows or cutting new door openings for an ADU routinely triggers plan-check scrutiny – the city wants the prior unpermitted work legalized before it signs off on new openings. That’s why a straightforward slider swap on a Garden Grove ranch home can turn into a two-part job: correct the rough opening and the prior work first, then set the new unit to current Title 24 glazing requirements. We scope both in writing from the start so there’s no surprise invoice halfway through.
CGI Models & Products We Service in Garden Grove
We service and replace the CGI 2000 Series pre-hung steel entry door, CGI Vinyl Replacement Windows in single-hung and slider configurations, the CGI Series 4000 aluminum sliding glass door, and the CGI 800 Series fiberglass entry door. For parts, our approach is straightforward: OEM CGI sashes, balances, rollers, and weatherstripping first, so fit and finish stay true to the original unit. When a profile is obsolete, we match it with quality aftermarket components from vendors who publish their test data. We don’t claim local stock – parts are ordered per job once we’ve measured the rough opening. If frame or sill rot has compromised the opening, we replace rather than patch.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in Garden Grove

Here’s what the trades typically run on a Garden Grove job. These are market-calibrated ranges, not phone-quote teasers, and your written estimate reflects your actual scope.
| Service | Typical Range |
|---|---|
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Full Bathroom Remodeling | $9,000 – $28,000 |
| Home Addition | $45,000 – $130,000 |
| ADU Construction | $90,000 – $220,000 |
| Garage Conversion | $30,000 – $80,000 |
What moves the number: whether prior unpermitted work has to be legalized, how much framing repair the rough opening needs, and glazing upgrades for Title 24 compliance. A free estimate includes an on-site measure, a written scope with allowances spelled out, and any change order in writing before work proceeds. Call (844) 320-2945 for an exact quote – estimates are free.
Serving Garden Grove, CA – Our Local Coverage Area
We serve Garden Grove and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in Garden Grove
Yes in most cases – like-for-like window and door replacement in Garden Grove typically requires a permit, and any change to the opening size definitely does. We pull the permit and get the inspection signed on every eligible job. Call (844) 320-2945 to talk through your specific unit.
Often yes – the narrow side yards here usually mean a rear ADU or garage conversion makes more sense than a side addition, which preserves your driveway. Lot coverage and setback planning has to happen up front. Call (844) 320-2945 to schedule a free site review.
Failed glazing seals cause the fog, and worn balance shoes and tilt latches cause the sticking – both are typical after 10 to 15 years of thermal cycling in this climate. Replacing the sash and balances usually solves it without a full unit swap. Call (844) 320-2945 for an assessment.
Usually yes – a garage conversion running $30,000 – $80,000 is well below a home addition at $45,000 – $130,000, and it makes real sense for adult-parent suites in Garden Grove’s multigenerational households. The caveat: if the garage was already converted informally, legalizing that work comes first. Call (844) 320-2945 for a scoped estimate.
We use OEM CGI replacement parts where they’re available and match obsolete profiles with quality aftermarket components. We’re independent – not CGI-affiliated or an authorized dealer – so we don’t handle manufacturer warranty claims, but we do the repair correctly. Call (844) 320-2945 to get started.
Service Areas Near Garden Grove
Our Garden Grove service area covers the ZIP codes above and the surrounding communities of Huntington Beach, Seal Beach, Los Alamitos, Rossmoor, and Cypress. We also work regularly in Stanton and Westminster, where the same post-war ranch housing stock and multigenerational remodeling demand show up.
Book Your CGI Service in Garden Grove Today
If your Garden Grove home has CGI windows or doors that stick, fog, or leak – or you’re planning an ADU, addition, or kitchen or bath remodel around them – let’s talk. Read more about our CGI service and what we cover. Call (844) 320-2945 for a free estimate. A live person answers, and the price you hear is the price on the contract.
Written by the team at Barrett & Sons Construction Huntington Beach.












