







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Huntington Beach Homeowners Choose Jerith Construction
We provide independent Jerith construction service in Huntington Beach, and what sets our Jerith work apart is that we know the product lines, the powder-coat finishes, and the specific ways coastal salt air and sun attack them. We install and service Jerith aluminum fence across Huntington Beach, from the Classic Series to the Commercial Grade lines, and we source the right replacement parts because we’re not locked into one manufacturer channel. Here’s the honest framing: Barrett & Sons Construction Huntington Beach is an independent Jerith service provider and is not affiliated with or authorized by Jerith. What we are is experienced. Our technicians have up to 28 years of experience, we pull permits on every eligible job, and every price change arrives as a written change order before work starts. Call (844) 320-2945 for a free estimate.
Why Trust Barrett & Sons Construction Huntington Beach for Your Jerith Construction?
Our technicians know Jerith products the way you know the tools in your own garage. They’ve installed Classic Series picket fence, repaired Regency Series panels after a gate post settles, and handled Commercial Grade sections where weld fatigue shows up after years of gate cycling. That familiarity matters when a fence starts racking or a latch stops catching. We use OEM-compatible parts to protect your finish match and your warranty integrity, and we know which aftermarket stainless fasteners hold up to Huntington Beach’s marine air. We’re owner-operated, founded in 1998, and Tom Barrett’s sons run the crews. Every eligible Jerith installation includes permits pulled and inspections signed. Every completed job is backed by the written 90-Day Done Right Promise: if it’s not done right, one call brings us back. We carry premium brands because materials you can look up beat mystery parts every time. That’s why homeowners here trust us with their Jerith work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Jerith Construction Problems We Fix in Huntington Beach
These are the issues we see most often on Jerith aluminum fence in Huntington Beach. Each one has a real cause, and each one needs the right fix.
- Powder-coat chalking and fading on sun-facing panels. Jerith’s finish holds up well, but after years of direct Huntington Beach UV exposure, sun-facing pickets and rails chalk and fade. The coating breaks down at the surface, and once it does, salt spray reaches the aluminum underneath. Touch-up is the first move; replacing the affected rail is the right call when the coating has failed across the whole run.
- Galvanic corrosion at stainless fasteners. Salt-laden marine air accelerates oxidation at every fastener. When the wrong metal meets the aluminum, the joint corrodes first and the connection weakens. Swapping in the right stainless hardware and treating the contact point stops it from spreading.
- Picket-to-rail weld fatigue and loosening. Repeated gate cycling and ground movement work the welds until a picket or rail loosens. Left alone, one loose pickup becomes a wobbly panel. A few failed welds are a repair; widespread failure is a replacement conversation.
- Post-footing settlement causing racking and misalignment. In Huntington Beach, shallow slabs and high water tables mean footings move. When a post settles, gates drag, latches miss, and the whole section racks out of square. Resetting the post is usually the fix, not adjusting the hinge.
- Fastener and hinge-bracket corrosion on gates. Gates take more abuse than fence panels, and hinge brackets corrode faster. We replace the hardware and check the swing before calling the job done.
Jerith Parts & Our Repair-vs-Replace Approach

We source OEM Jerith replacement pickets, rails, and brackets whenever they’re available. That keeps your finish match and protects warranty integrity. When OEM supply is slow, we use quality aftermarket stainless fasteners that hold up to Huntington Beach’s marine air. We don’t claim to stock parts locally. We source them per job.
Here’s how we decide repair versus replace, honestly. A few failed welds, a settled post, or a localized coating failure? That’s a repair. Once a Jerith fence has more than a few failed welds or widespread coating failure across multiple panels, piecemeal repair stops making sense. You’ll spend the same money chasing the next failure. We’ll tell you that plainly. Call (844) 320-2945 for a free estimate and a straight answer on your fence.
Our Jerith Service Process – Step by Step
- 1
Diagnosis. We walk the fence line, check every post for settlement, test the gate swing, and inspect fasteners and welds for corrosion. We identify the model line so the right parts get ordered.
- 2
Written scope. You get a written scope with the exact parts, the finish match, and the price before any work starts. If the scope changes, a written change order arrives first.
- 3
Repair or install. For repairs, we reset footings, replace the affected pickets or rails, and swap in the right stainless hardware. For new installs, we set posts to depth, level the runs, and hang the gate to swing clean. Permits get pulled and inspections signed on every eligible job.
- 4
Test. We cycle the gate, check the latch, and walk the full run with you so you see the swing and the hardware yourself.
- 5
Warranty. Every completed job gets the written 90-Day Done Right Promise. One call brings us back.
See the difference
Before
After
Before
After
Before
AfterJerith Products We Service & Install in Huntington Beach
We work across the Jerith aluminum fence family. That covers the Classic Series, the Regency Series, the Commercial Grade line, and standard Jerith picket and rail aluminum fence. For Huntington Beach properties near the coast, the finish and fastener choices matter more than the profile, so we talk through both before quoting. We install new fence and we repair existing Jerith fence, whichever makes sense for the condition of yours. Vinyl fence installation is also on the menu if aluminum isn’t your speed. We only claim inventory we’ve ordered for your job, not stock sitting on a shelf.
We Also Service These Brands
We’re not a single-brand shop. Alongside Jerith fence work, Barrett & Sons Construction Huntington Beach handles KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures on kitchen and bath projects. That multi-brand depth means one crew can carry a job from fence line to kitchen without a handoff. Call (844) 320-2945 to talk through what you need.
FAQs – Jerith Construction Service in Huntington Beach

No. We are an independent Jerith service provider and are not affiliated with or authorized by Jerith. We work on Jerith products because we know them well, not because the manufacturer endorses us. Call (844) 320-2945 for a free estimate.
Yes, we source OEM Jerith replacement pickets, rails, and brackets whenever they’re available, which protects your finish match and warranty integrity. When OEM supply is slow, we use quality aftermarket stainless fasteners suited to coastal conditions. Call (844) 320-2945 to talk parts for your fence.
Most Jerith repairs finish in a single visit once the replacement parts are in hand. New aluminum fence installs typically run over several days depending on the length of the run, the footing depth, and whether permits apply. Call (844) 320-2945 for a schedule estimate on your job.
We service and install the Jerith Classic Series, Regency Series, Commercial Grade line, and standard Jerith picket and rail aluminum fence. If you’re not sure which line you have, we’ll identify it during the diagnosis. Call (844) 320-2945 to get started.
Proper repair with OEM-compatible parts and the right fasteners is the warranty-safe path, which is why we lean on OEM parts when we can get them. We’ll tell you upfront if a repair approach risks your coverage. Call (844) 320-2945 for a free second opinion on any written estimate.
Yes, in many cases. A settled post, a few failed welds, or localized coating failure are all repairable. Widespread weld failure or coating breakdown across multiple panels usually points toward replacement. Call (844) 320-2945 for a free estimate and an honest call on yours.
White chalky spots are powder-coat chalking, the finish breaking down from years of UV exposure on sun-facing panels. Once it starts, salt spray can reach the aluminum underneath. Call (844) 320-2945 to schedule an inspection before the coating fails further.
Salt-laden marine air accelerates corrosion at every fastener, and Huntington Beach’s high water table lets post footings settle, which racks the fence and throws gates off. Both are fixable with the right hardware and footing work. Call (844) 320-2945 for a free estimate tailored to your property.
Aluminum fence installation in Huntington Beach runs $4,000 – $10,000, and vinyl fence installation runs $3,500 – $9,000. The range depends on run length, footing conditions, and the Jerith line you choose. Call (844) 320-2945 for an exact quote – estimates are free.
| Service | Typical Cost Range in Huntington Beach |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
Book Your Jerith Service in Huntington Beach, CA
Ready to fix or install your Jerith fence? Call Barrett & Sons Construction Huntington Beach at (844) 320-2945 to schedule your free estimate. We’ll walk the fence line, give you a written scope, and quote a price you can plan around. Estimates are free, and no trip charge applies inside the county.
Written by the team at Barrett & Sons Construction Huntington Beach.












