







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Windows & Doors: The Huntington Beach Owner’s Guide
We replace and repair KraftMaid-compatible windows and doors in Huntington Beach, and most window replacements run $4,500 – $15,000 while impact window installation lands between $8,000 and $25,000 depending on count, glass package, and opening size. A single failed sash, hinge, or door slab is usually a smaller job, often handled in one visit once we’ve matched the part. Owners typically call us after a window that won’t close flush against the frame, a patio door that catches on the sill, or a hinge that’s pulled loose from the jamb for the second time. Barrett & Sons Construction is an independent service provider and not affiliated with KraftMaid.
Key Takeaways
- KraftMaid windows and doors are matched by series, opening size, and handing – not by photo alone.
- Installed window replacement in Huntington Beach runs $4,500 – $15,000; impact glass $8,000 – $25,000.
- Salt air and coastal humidity are the two biggest reasons hardware and seals fail early here.
- Every scope and price change comes to you in writing before work starts.
Which KraftMaid Models This Applies To

KraftMaid is best known for cabinetry, and its window and door lines are matched less by a marketing name than by the physical part. What identifies the right replacement is the series stamp on the sash or jamb, the rough opening measurement, and the handing – which side the hinge sits on when you face the door from outside. That last one trips up more Huntington Beach owners than anything else: a left-hand inswing door and a right-hand inswing door look identical in a photo and are useless swapped.
Start with the manufacturer’s label. It’s usually on the top or side of the sash channel, sometimes behind the hinge plate on a door. Photograph it, then measure the rough opening at three points – top, middle, bottom – because coastal homes settle and a 1/4-inch variance changes which unit fits cleanly. From there you’re choosing between an OEM part (exact match, longer lead time, higher cost) and a quality aftermarket equivalent (faster, often 20 – 40% less, but the frame profile and weatherstrip must match). For KraftMaid specifically, the aftermarket route works well on hardware and weatherstrip and gets risky on full sash assemblies where the glazing bead profile is proprietary.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your KraftMaid Windows & Doors Is Failing
- The window won’t latch flush. Usually a worn keeper or a frame that’s shifted as the stucco and framing have moved with our seasonal soil movement. If it takes two hands to close, the problem is the frame, not the latch.
- Drafts or condensation between panes. A failed seal lets the argon escape and moisture in. By the time you see fog between the glass, the insulated unit is done and needs replacement, not cleaning.
- Hinges pulling out of the jamb. Common on doors that get sun on one side all afternoon. The screws wallow out the wood and re-driving them only buys you a season.
- Sticking or dragging patio door. Almost always a worn roller or a track full of Huntington Beach sand. Rollers are cheap; the track wear underneath them is what adds cost.
- Peeling or chalky finish on coastal exposures. Salt air eats exterior coatings and hardware faster within a mile or two of the water. Once the finish breaks, wood and aluminum both start to corrode underneath.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Huntington Beach, standard window replacement runs $4,500 – $15,000 installed, and impact window installation runs $8,000 – $25,000. The range is driven by count, glass package, opening size, whether framing or stucco repair is needed, and how many units are second-story or awkward to reach. A single door slab swap or hardware replacement is a much smaller ticket, quoted after we’ve seen the part.
You get a written line-item quote: parts, labor, disposal, and any trim or stucco repair called out separately. No allowance hides in the number. If we open the wall and find rot, you get a written change order before we touch it – because the allowance that isn’t on paper is a surprise waiting for a date. Every eligible job includes permits pulled and inspections signed, and every completed job is backed by our written 90-Day Done Right Promise.
DIY or Call Us?
You can safely check a few things yourself: wipe and inspect the weatherstrip, test the latch, vacuum the patio door track, and photograph the label. What goes wrong is the next step. Pulling a sash or resetting a hinge in a door that carries glass is heavy work, and a dropped unit on a second story is a real injury and a real bill. Replacing insulated glass units under warranty also requires the right documentation, and a homeowner install can void that coverage.
If you’re not sure whether it’s hardware or the frame, call us at (844) 320-2945 and describe what it’s doing. We’ll tell you straight whether it’s a small fix or a replacement, and a second opinion on any written estimate is free.
FAQs

Expect 15 – 25 years on the frame and glass, but 5 – 12 years on hardware and weatherstrip in coastal air. Salt and afternoon sun wear exterior parts faster within a couple miles of the water. Call (844) 320-2945 for an honest read on yours.
Often yes. Hardware, rollers, weatherstrip, and latch keepers are all repairable, and a fogged insulated glass unit can be swapped without replacing the whole window. Structural frame rot is the usual point where replacement wins. Call (844) 320-2945 with photos and we’ll tell you which side of that line you’re on.
A single door slab or hinge set is usually a half-day; a full window replacement across a house runs two to four days. We give you the schedule in writing with the quote. Call (844) 320-2945 to book a free estimate.
From the label, the rough opening measurement, and the handing – never from a photo alone. We confirm the series and match OEM or a verified aftermarket equivalent. Call (844) 320-2945 and have your label photo ready; estimates are free.
We also work with Cambria, Silestone, and Kohler on kitchens and baths across Huntington Beach if your project reaches past the window and door. Our crew members have up to 28 years of experience, we’re licensed and insured, and a live person answers the phone 24 hours a day. Standing offers include $40 off any repair over $200, a free second opinion on any written estimate, no trip charge inside the county, and a permanent 10% senior and veteran discount. Call (844) 320-2945 for a free estimate.
Written by the team at Barrett & Sons Construction Huntington Beach, serving Huntington Beach and nearby areas.












