







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Huntington Beach Homeowners Choose KraftMaid Construction
Barrett & Sons Construction provides independent KraftMaid cabinetry service and installation in Huntington Beach, CA. We handle KraftMaid cabinet installation, countertop work, refacing and full kitchen remodeling, and we know the platform well enough to order the right OEM hinges, glides, fillers and door fronts the first time. We’re an independent contractor, not a KraftMaid dealer, and we’re not authorized or sponsored by the manufacturer.
That independence is the point. KraftMaid builds a good box, but a kitchen near the water is a different animal. Huntington Beach sits on marine clay and a high water table, and salt air moves through every house within a few miles of the sand. Cabinet work here lives or dies on how well it handles moisture. We plan for that before the first cabinet comes off the wall.
If you’re pricing KraftMaid work in Huntington Beach, call (844) 320-2945 for a free estimate.
Why Trust Barrett & Sons Construction Huntington Beach for Your KraftMaid Construction?

Most of what fails on a KraftMaid kitchen fails at the details, not the box. A soft-close undermount glide that was never rated for a fully loaded drawer. A Prelude thermofoil door peeling at the edge because the sink base took on water for years. A half-overlay door rubbing the frame because the run wasn’t shimmed and squared. Our technicians have up to 28 years of experience, and much of that time has been spent in kitchens exactly like these.
We work from KraftMaid’s spec sheets. That means we know the Vantage all-plywood line runs full-overlay, the Delano and Marquee door styles have their own hinge platform, and the Prelude line uses MDF and thermofoil in ways that matter when moisture is involved. Ordering the right component the first time saves you a second punch list.
We keep the work warranty-safe. When we touch a KraftMaid kitchen, we use OEM-compatible parts on anything the manufacturer’s warranty still covers, and we document what we replaced and why. If you’re papering a claim, that record helps. Every job here comes with written change orders before any scope moves, permits pulled and inspections signed on eligible work, and our 90-Day Done Right Promise on the finished product.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common KraftMaid Construction Problems We Fix in Huntington Beach
Huntington Beach’s marine layer and onshore salt air corrode steel, fasteners and flashing fast. That’s a construction-material issue, and it shows up in cabinetry as much as in roof flashing. Here’s what we see most often in KraftMaid kitchens around the city.
- Prelude and MDF door faces delaminating at the edges. The thermofoil on KraftMaid’s Prelude line starts lifting along the bottom and side edges of doors under the sink and dishwasher. The cause is humid air and small leaks wicking into the MDF core. Once the edge lifts, moisture gets behind the film and the peel accelerates.
- Soft-close drawer glides sagging or failing. Full-extension undermount slides on loaded drawers wear out faster than people expect. Overloading a 24-inch drawer with cast iron and stoneware for ten years will do it. When a glide fails on one side first, the drawer racks and the front loosens.
- MDF door and box panels swelling near moisture. Panels swell around dishwashers, sinks and under-counter appliances, and they don’t shrink back. A swollen panel usually means the sink or dishwasher opening wasn’t sealed properly the first time, or the seal failed years later.
- Half-overlay or older frame door hinges loosening. Doors rub the frame and won’t close flush. In older KraftMaid runs, this almost always traces to an installer who didn’t shim and square the run before hanging doors. The fix is realignment at the frame, not new doors.
- Fillers and end panels pulling away at the wall. Coastal humidity moves wood and stucco differently, and fillers at the wall can gap over time. Small gaps let air and moisture behind the cabinet run, which is where bigger problems start.
A common scenario is a KraftMaid Prelude or MDF-front kitchen near the beach where the doors below the sink and dishwasher have swollen and the thermofoil is peeling at the edges. The usual cause is years of humid air and small leaks wicking into the MDF, plus undermount glides that were never rated for a fully loaded drawer. A qualified local pro typically pulls the affected doors and boxes, checks whether the face frames and adjacent runs are dry and sound, replaces the swollen units and hardware, and reseals the sink and dishwasher openings before touching the counters.
KraftMaid Parts & Our Repair-vs-Replace Approach

We don’t stock KraftMaid parts locally. Parts get sourced per job, matched to the exact series, finish and door style, so you get the right component instead of a near-match that looks off in daylight. On hinges, glides, fillers and door or drawer fronts, OEM is usually the right call. The finish and fit have to match the rest of the kitchen, and a generic slide that fits the box won’t look right with a KraftMaid drawer front on it. Generic aftermarket slides are fine when the box and face no longer need OEM matching.
Repair or replace is a cabinet-by-cabinet decision, and we make it honestly after we’ve inspected the face. A single swollen door or a failed glide on a sound box is a straightforward repair. An entire run of water-swollen MDF or delaminating Prelude doors is a different conversation, and the honest advice is usually to replace the boxes rather than chase repairs that will keep coming back.
Call (844) 320-2945 for a free estimate and a written scope before anything gets ordered.
Our KraftMaid Service Process – Step by Step
- 1
Diagnosis. We inspect the full run, not just the broken cabinet. Doors, glides, hinges, fillers, the sink and dishwasher openings, and the wall behind the cabinets all get checked. We look for the moisture source before we quote a fix.
- 2
Written scope and change orders. You get a line-item estimate: which cabinets get repaired, which get replaced, which parts get ordered, and what the counters and backsplash cost if they’re moving. Any change gets a written change order before work proceeds.
- 3
Repair or install. We pull the affected doors and boxes, verify the face frames and adjacent runs are dry, install OEM-compatible hardware, and set new cabinets plumb and shimmed. Every run is squared before doors go back on.
- 4
Test and reseal. Every drawer and door gets cycled. Sink and dishwasher openings get resealed, and we check the fillers at the wall for gaps. Permits are pulled and inspections signed on eligible work.
- 5
Warranty. The finished job comes with our 90-Day Done Right Promise in writing. If something isn’t right, one call brings us back.
KraftMaid Products We Service & Install in Huntington Beach

We work across the KraftMaid platform, new and existing. That includes the Vantage all-plywood, full-overlay series, the Delano and Marquee door styles, and the Prelude MDF and thermofoil entry line. We also handle KraftMaid bath vanity and linen cabinet programs, which come up often on Huntington Beach remodels where the same moisture problems show up on a smaller scale.
On the countertop side, we install quartz, natural stone and solid surface over KraftMaid boxes, and we plan the overhang, sink cutout and backsplash detail before the cabinets are set.
We Also Service These Brands
KraftMaid is one brand in a wider set we handle. We also work with Cambria, Silestone, Kohler and Toto, so a kitchen or bath job that crosses cabinet, counter and fixture brands stays with one crew instead of two or three subcontractors handing off blame. If your project mixes KraftMaid boxes with Cambria tops and Kohler fixtures, that’s a normal week for us.
See the difference
Before
After
Before
After
Before
AfterFAQs – KraftMaid Construction Service in Huntington Beach
No. We’re an independent contractor, not a KraftMaid dealer, and we’re not authorized or sponsored by the manufacturer. We work on KraftMaid cabinetry because we know the platform, not because KraftMaid endorses us. Call (844) 320-2945 with questions about your specific kitchen.
Yes, when the job calls for it. Hinges, glides, fillers and door or drawer fronts get matched to your exact KraftMaid series and finish so the kitchen looks consistent and stays warranty-safe. Generic aftermarket slides are fine where the box and face don’t need OEM matching, and we’ll tell you which is which before we order.
A single door or glide replacement is usually a single visit. Replacing a run of swollen boxes or refacing a full kitchen takes longer, and the timing depends on the parts order and whether counters are moving. You get the timeline in writing with the estimate, and any change comes as a written change order first. Call (844) 320-2945 for a scope and timeline.
We cover the Vantage all-plywood full-overlay series, the Delano and Marquee door styles, the Prelude MDF and thermofoil line, and KraftMaid bath vanity and linen cabinet programs. If you’re not sure which series you have, the spec sheet or a photo of the door back usually settles it.
Not if it’s done right. Using OEM-compatible parts on covered components, keeping the cabinet box intact, and documenting what was replaced and why keeps your KraftMaid warranty in good standing. We work warranty-safe on purpose. Call (844) 320-2945 and we’ll walk through what’s covered before we touch anything.
Cabinet installation runs $4,000-$13,000, countertop installation $2,000-$6,500, backsplash $800-$2,500, and a kitchen island $3,000-$10,000. A full kitchen remodel runs $14,000-$45,000, and a small kitchen remodel $9,000-$20,000. Call (844) 320-2945 for an exact quote – estimates are free.
| KraftMaid Project Type | Price Range in Huntington Beach |
|---|---|
| Cabinet Installation | $4,000-$13,000 |
| Countertop Installation | $2,000-$6,500 |
| Backsplash Installation | $800-$2,500 |
| Kitchen Island Installation | $3,000-$10,000 |
| Small Kitchen Remodel | $9,000-$20,000 |
| Full Kitchen Remodeling | $14,000-$45,000 |
Book Your KraftMaid Service in Huntington Beach, CA
If your KraftMaid kitchen needs repair, a new run of cabinets, or a full remodel, call (844) 320-2945 for a free estimate. We’ll inspect the cabinets in person, put the scope and allowances in writing, and give you a line-item price before anyone orders a part. Permits pulled and inspections signed on eligible work, and our 90-Day Done Right Promise on the finished job.
Why Huntington Beach Homeowners Choose KraftMaid Construction
Why does the coastal setting matter for KraftMaid work specifically? Because Huntington Beach’s marine clay, high water table and salt air punish cabinetry in ways inland cities don’t. In the low-lying neighborhoods around Huntington Harbour and the Bolsa Chica wetlands, crews routinely hit the water table within a few feet and must dewater excavations before a slab or footing goes in. Salt spray and the marine layer corrode steel and fasteners fast, and that includes the steel in hinge plates, drawer glides and the screws holding cabinet runs to the wall. Winter rain concentrates December through March, and flat or reverse-slope lots near the low-lying southeast expose any drainage weakness around the house.
That’s why the trust question here isn’t just “who installs cabinets.” It’s who understands what the coast does to them. We handle the full scope: cabinets, countertops, backsplash, islands and full kitchen remodels. On coastal-zone work, even a small addition can trigger a coastal development permit and a sea-level-rise review, and we plan for that instead of discovering it mid-job.
Information Gain: What We Know About KraftMaid That Generic Pages Don’t
KraftMaid’s thermofoil and MDF lines fail in a specific order, and knowing the order changes the repair. The thermofoil peels first at the edge nearest the moisture, which on a sink base means the bottom edge and the hinge side. The MDF core swells second, and swelling is one-way; the door never returns to flat. The glide failure usually comes last, once the door has swollen enough to bind and the drawer has been slammed enough times to rack the slide. That’s why we inspect the whole face before quoting a fix. Replacing one door without resealing the sink opening is a repair that comes back in two years.
Key Takeaways
- We’re an independent KraftMaid service provider in Huntington Beach, not authorized or sponsored by the manufacturer.
- We cover Vantage, Delano, Marquee, Prelude, and KraftMaid bath vanity and linen programs.
- Prelude thermofoil and MDF doors are the most common failure we see in coastal Huntington Beach kitchens.
- We source OEM-compatible parts per job and work warranty-safe.
- Every job is backed by written change orders, permits pulled on eligible work, and the 90-Day Done Right Promise.
Book your KraftMaid service in Huntington Beach by calling (844) 320-2945. A live person answers, and estimates are free.
Written by the team at Barrett & Sons Construction Huntington Beach.












