







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Roofing: The Huntington Beach Owner’s Guide
If you’ve got a Mr-Glass roofing system on your Huntington Beach home and it’s leaking, sagging, or shedding panels, we install and repair Mr-Glass-compatible roofing across the city, with most repair work running $400 – $1,800 and full roof replacement at $8,000 – $20,000. We’re an independent service provider, not affiliated with Mr-Glass, so we match the right part to your actual model instead of guessing. Barrett & Sons Construction has been doing this work across the Huntington Beach area for over 29 years, founded in 1998.
Owners usually find out something’s wrong the same way. There’s a brown ring on the ceiling after a Santa Ana wind event, or one panel of a Mr-Glass roof starts lifting along the ocean side of the house. Sometimes it’s quieter: a seam that keeps weeping water into the attic even though no rain got through the interior. By the time someone calls us, they’ve usually already pushed it off a season or two. That’s fine. We’ve seen plenty of it in Huntington Beach, and the fix is usually more straightforward than the homeowner expects.
Which Mr-Glass Models This Applies To

Mr-Glass built its name on modular and panelized roofing components, and the parts aren’t universal across the line. The first thing we do on any Huntington Beach job is match the model number from the original installation paperwork to the fastener and panel spec, because a panel that fits one series won’t necessarily seat on another. Every Mr-Glass roof we’ve touched has a data plate or nameplate tucked near the ridge, in the garage, or on the inside of an attic framing member. The number on that plate is what matters. If the paperwork is gone, we measure panel thickness, note the seam profile, and check the fastener layout against the spec sheet before ordering anything.
The OEM-versus-aftermarket call is worth understanding. Mr-Glass-branded replacement panels carry a premium, and in some cases the aftermarket equivalents from the same manufacturing tier fit the same track and are indistinguishable on the roof. Quality matters more than the label. We won’t push you toward an OEM part when the aftermarket one does the same job. We’ll tell you plainly when the OEM is the only thing that fits.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Mr-Glass Roofing Is Failing
- Interior water stains after a wind-driven rain. Mr-Glass panels rely on their fastener seal and seam integrity. In Huntington Beach, a Santa Ana event can drive water sideways past a seal that looks fine from the ground, and the leak shows up on the ceiling far from where the actual breach is.
- Lifted or rattling panels along the ocean side. Salt air and marine humidity are hard on any roofing system. If panels are starting to lift, the underlying fastener clips have likely fatigued, and that’s a sign the system’s been stressed one too many seasons.
- Rust streaks or weeping seams at the fasteners. Rust at a fastener head means moisture has been sitting there, not turning a warning into anything more serious. It’s the early tell.
- Sagging roof lines visible from the street. A sag usually points to decking or framing, not just the panel. That’s a bigger conversation than a part swap, and we’ve caught it early on more than a few Huntington Beach homes after a stretch of heavy spring rain.
- Granule loss or surface chalk on older panels. Every roofing material ages, and Mr-Glass is no exception. Once the surface starts breaking down, replacement moves from repair to a conversation about lifespan.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s what installed Mr-Glass-compatible roofing runs in Huntington Beach, quoted honestly and kept to the same ranges we use across the area:
| Work | Typical Range |
|---|---|
| General roof repair | $400 – $1,800 |
| Tile roof repair | $600 – $2,500 |
| Full roof replacement | $8,000 – $20,000 |
| Metal roof installation | $15,000 – $40,000 |
What drives the range is fit-up: how much existing decking needs work, whether the old panel system matches an available replacement, and how a single repair expands into a multi-panel job. We quote parts and labor separately, so you can see what you’re paying for the material and what you’re paying us to install it. Every eligible job gets permits pulled and inspections signed, and every completed job is backed by our written 90-Day Done Right Promise. If something’s off after we leave, one call brings Tom back.
DIY or Call Us?
There’s a short list of things a careful owner can check without getting on the roof. Look at the ceiling inside, photograph any stains, note where the stains are in relation to the roofline above, and pull the original Mr-Glass paperwork if you can find it. If you have a garage-safe view of the roofline, a photo from the ground helps too.
What we don’t recommend is climbing up to inspect or swap a panel yourself. Roofing is genuine height work, and a Mr-Glass panel system on a Huntington Beach home isn’t the place to find out you’ve got a balance problem or a worn harness. Leave the panel replacement, the fastener call, and the seam reseal to someone who does it every week. Our crew members are background-checked and have up to 28 years of experience. Call us at (844) 320-2945 and we’ll take a look.
FAQs

Most Mr-Glass systems hold up for 20 to 30 years with reasonable care, though a Huntington Beach roof near the coast often gets less because salt air and marine humidity age the fasteners faster than inland installations do. Call (844) 320-2945 if you want an honest read on how much life is left in yours.
Yes, and usually it should be. A single failed panel, a localized seam, or a handful of fatigued fasteners is a repair, typically running $400 – $1,800, not a reason to re-roof. Full replacement makes sense when the decking or framing is compromised or the surface material is already breaking down. Call us for a free second opinion on any written estimate you’ve already received.
A single-panel repair is typically a few hours; a small multi-panel repair is usually a full day. A full replacement is a multi-day job depending on roof size and how much decking needs work. We’ll give you a written schedule before we start, and any change to scope comes to you as a written change order before we proceed.
We match the model number from your Mr-Glass installation paperwork to the correct panel spec and order it. When an aftermarket equivalent fits the same track and is the right quality, we’ll offer it; when the OEM is the only thing that works, we’ll tell you. We don’t stock parts and won’t pretend to. We also service surrounding premium brands like KraftMaid, Cambria, and Silestone if you’re planning other work around the house.
When you’re ready to stop worrying about the roof and get an honest answer, call Barrett & Sons Construction Huntington Beach at (844) 320-2945 for a free estimate. We’ll take a look, tell you what we find, and put the price in writing – parts, labor, permits, all of it – before we touch a nail. Our phones are answered by a live person 24 hours a day, seven days a week.
Written by the team at Barrett & Sons Construction Huntington Beach, serving Huntington Beach and nearby areas.












