







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Huntington Beach Homeowners Choose Mr-Glass Construction
We provide independent Mr-Glass construction service in Huntington Beach, from frameless shower enclosures and sliding glass doors to custom mirrors and glass replacement units. What makes our Mr-Glass work different is that we handle the brand every week, so the fit, trim, and hardware quirks you’ll see in a coastal Huntington Beach bathroom don’t surprise us. Our technicians have up to 28 years of experience, every scope and price change arrives in writing, and eligible jobs get permits pulled and inspections signed. One thing to say clearly up front: we’re an independent service provider, not affiliated with or authorized by Mr-Glass, and we don’t act as a warranty agent for the manufacturer. Call (844) 320-2945 to schedule a free estimate.
Why Trust Barrett & Sons Construction Huntington Beach for Your Mr-Glass Construction?

Mr-Glass enclosures have their own small world of hardware, and the crew that works on them regularly learns things a general handyman won’t. A Mr-Glass frameless door hangs on pivot hinges with nylon bushings; when those bushings wear, the door sags and binds, and the fix is a hinge set or a bushing swap, not a new enclosure. Sliding doors run on rollers in a track, and a door that won’t close square is usually a roller or a track-alignment problem before it’s ever a glass problem.
We source OEM Mr-Glass hinges, rollers, sweeps, and handles when they’re available, because a direct fit means factory hole patterns and a finish that matches. When OEM parts are gone, we specify quality aftermarket glass hardware matched to your glass thickness (3/8″ or 1/2″) and hole spacing. Everything we do is warranty-safe: we don’t drill extra holes in tempered panels or patch a chip, because those moves are what give a manufacturer a reason to walk away. We work as an independent Mr-Glass service provider, we’re honest about that, and we put the scope in writing before anything comes off the wall.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Mr-Glass Construction Problems We Fix in Huntington Beach
Salt air, marine-layer humidity, and the moisture cycling in a working bathroom are hard on glass hardware, and they show up as a handful of predictable failures on Mr-Glass products.
- Frameless shower doors sagging or binding. Mr-Glass pivot hinges fatigue at the hinge point, and the nylon bushings wear thin or disappear altogether. The door then drops, drags on the sweep, and won’t hold its closed position. It’s a hardware failure, and in most cases the glass is fine.
- Glass-to-wall seal failure. Silicone and clear vinyl sweeps degrade faster in Huntington Beach than inland because of humidity and salt air. When the seal goes, water tracks out under the door and along the fixed panel and lands on the bathroom floor. Fresh silicone and a new sweep reset the seal.
- Tempered glass edge chipping or spontaneous breakage. Mr-Glass panels can chip around cutouts and handle holes, and tempered glass under installation stress or a hard impact can let go entirely. Chipped glass at a hole is a replacement, not a repair.
- Uneven reveal or poor closure on sliding doors. Worn rollers or an out-of-plumb track make a Mr-Glass sliding shower door hang crooked or stop short of the jamb. Sometimes it’s the rollers. Sometimes the track itself has shifted.
- Loose wall anchors from moisture cycling. The anchors holding a fixed panel can loosen as the wall assembly takes on and sheds moisture. That’s why we check the mounting points, not just the door.
Mr-Glass Parts & Our Repair-vs-Replace Approach

The honest answer on a Mr-Glass job is usually about which part failed. Hardware-only failures – hinges, bushings, rollers, sweeps, and handles – are repair work, and a hardware swap usually beats a full enclosure replacement on cost and downtime. Cracked or chipped tempered glass is a different story: tempered panels can’t be patched or drilled, so that panel gets replaced.
We don’t claim to keep Mr-Glass parts on a shelf. We identify the exact hinge, roller, or sweep your enclosure uses, then order OEM Mr-Glass hardware when it’s available for a direct fit and factory finish. If it isn’t, we specify quality aftermarket hardware matched to your glass thickness and hole pattern, and we tell you which one you’re getting and why. Call (844) 320-2945 and we’ll give you a written line-item estimate – free.
A typical Mr-Glass frameless enclosure call starts with a door that drags or won’t stay closed. Often the hinge bushings are worn or the wall anchors have loosened from moisture cycling. A qualified local pro removes the door, inspects the hinge plates and glass holes, replaces the hinge set or bushings with OEM-spec parts, re-levels the fixed panel, and re-seals the perimeter with fresh silicone. When the glass is chipped at a handle or hinge hole, replacing that panel is the standard path.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We look at the whole assembly: hinge plates and bushings, roller condition, track plumb, sweep wear, silicone lines, and the glass edges around every cutout. On a coastal Huntington Beach job we also check the wall anchors and the substrate behind them, because moisture cycling loosens them.
- 2
Repair or install. Hardware-only problems get the right OEM Mr-Glass part or a matched aftermarket equivalent, installed to the correct torque and alignment. New enclosures get set plumb and level with clean hole alignment so the glass isn’t stressed.
- 3
Test. We open and close the door through its full swing, check the reveal for even gaps, and run water to confirm the sweep and silicone actually hold. A shower door that leaks after the crew leaves wasn’t tested.
- 4
Warranty and paperwork. You get the scope and any change in writing, and every completed job is backed by our written 90-Day Done Right Promise. If something’s off, one call brings us back.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Huntington Beach
We work on the Mr-Glass lines that show up in Huntington Beach homes most often: frameless glass shower enclosures in standard 3/8″ and 1/2″ glass, sliding glass shower doors with chrome or matte-black hardware, custom mirrors and glass shelving, and window and door glass replacement units. On the enclosure side that covers new walk-in shower installation and tub-to-shower conversion, plus the hardware service that keeps an existing enclosure working: hinge and bushing replacement, roller and track service, sweep and silicone re-sealing, and handle swaps. If your enclosure is a series we haven’t named here, call and describe it – a photo of the hinge or roller usually tells us what we need to order.
We Also Service These Brands
Mr-Glass is one brand in a full trade list for us. We install and service KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures, and we handle full kitchen and bathroom remodels where the glass work is one piece of a bigger job. That breadth matters when your shower enclosure, vanity, and tile all need to line up on the same schedule. One crew, one written scope, one call to (844) 320-2945.
FAQs – Mr-Glass Construction Service in Huntington Beach

No. We’re an independent Mr-Glass service provider, not affiliated with, authorized by, or acting as a warranty agent for the manufacturer. We work on Mr-Glass products because we know them well, and we say so plainly. Call (844) 320-2945 for a free estimate.
We use OEM Mr-Glass hinges, rollers, sweeps, and handles when they’re available, and quality aftermarket hardware matched to your glass thickness and hole pattern when they’re not. We tell you which one you’re getting before we order it. Call (844) 320-2945 and we’ll price both options.
Most hardware-only jobs – a hinge set, new rollers, a sweep and re-seal – are done in a single visit. A full enclosure replacement takes longer because glass has to be measured and ordered. We give you a written timeline with the estimate. Call (844) 320-2945 to schedule.
We cover Mr-Glass frameless glass shower enclosures in 3/8″ and 1/2″ glass, sliding glass shower doors with chrome or matte-black hardware, custom mirrors and glass shelving, and window and door glass replacement units. If you’re not sure which series you have, a photo of the hinge or roller usually settles it. Call (844) 320-2945.
Proper service with correct parts and no drilling into tempered glass is the warranty-safe path, and that’s how we work. We can’t speak for the manufacturer or act as a warranty agent, so keep your original paperwork and ask them directly about coverage. Call (844) 320-2945 for a written scope.
Here are the ranges we quote for the Mr-Glass work Huntington Beach homeowners call about most:
| Service | Typical Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Hardware-only repairs usually land well under those numbers, and you get a written line-item quote before anything starts. Call (844) 320-2945 for an exact quote – estimates are free.
Book Your Mr-Glass Service in Huntington Beach, CA
Whether it’s a sagging Mr-Glass shower door, a leak at the sweep, or a full walk-in enclosure, we’ll give you a written scope and a straight answer on repair versus replace. Call (844) 320-2945 for a free estimate. We’re licensed and insured, every eligible job gets permits pulled and inspections signed, and our 90-Day Done Right Promise is written on every contract.
Written by the team at Barrett & Sons Construction Huntington Beach.












