







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Schluter Roofing: The Huntington Beach Owner’s Guide
Schluter makes waterproofing and edge-profile systems that sit under and around your roof’s finished surface, and when one of those components fails, the repair usually runs $400 – $1,800 installed here in Huntington Beach. We install and repair Schluter-compatible roofing assemblies, pull the permits, and back the work with our written 90-Day Done Right Promise. You’ll usually find out something’s wrong the same way most owners do: a brown water stain spreading across a bedroom ceiling after a winter storm, or a strip of metal edge lifting away from the fascia where the roof meets the gutter. Call (844) 320-2945 and a live person answers, day or night, and we’ll get an estimator out for a free look.
Which Schluter Models This Applies To

Schluter’s roofing side is best known for its edge profiles and drainage systems, and the part that matters most to a Huntington Beach homeowner is usually the drip edge or edge-protection profile running along the eaves and rakes. The exact profile has to match your roof’s edge thickness and overhang, and the wrong size is where most of these jobs go sideways. Here’s how to tell what you have: measure the thickness of the roof deck plus the finished layers at the edge (fascia board to top of shingle or tile), then measure the overhang. A profile sized for a thin shingle edge won’t seat properly on a tile roof, and Huntington Beach has plenty of both, from the older shingle homes near downtown to the tile roofs on the hillside streets off Goldenwest.
On the OEM-versus-aftermarket question: Schluter’s own profiles are extruded aluminum or PVC with specific dimensions, and a generic big-box drip edge is thinner gauge and often a half-size off. For a visible edge detail that sheds water, we lean OEM or a true dimensional match, because the whole point is the fit. We’re an independent contractor and not affiliated with Schluter, but we source genuine components when the spec calls for it. If you’re also updating other parts of the house, we handle KraftMaid, Cambria, and Silestone work too. Call (844) 320-2945 for a free estimate and we’ll confirm your profile before we order anything.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Schluter Roofing Is Failing
Most failures show up at the edges and valleys first, where water concentrates. Here are the symptoms that tell us it’s time for a closer look.
- Water staining on ceilings or exterior walls near the eaves. That’s a drainage or edge-seal failure letting water track back under the roofing layers instead of off the roof.
- A drip edge profile that’s pulling away from the fascia. Fasteners back out and the metal lifts, which lets wind-driven rain climb underneath. Huntington Beach’s salt air speeds up corrosion on cheap fasteners, so this shows up faster near the coast.
- Rust or white oxidation along the metal edge. That’s the coastal marine layer doing its work on a lower-grade profile. It’s a slow failure until it isn’t.
- Gutter overflow or water sheeting past the roof edge during rain. The edge profile isn’t directing water into the gutter anymore, so it runs down the fascia and into the wall.
- Visible gaps or lifted laps at valley transitions. Water finds those gaps during the first real storm of the season, which in Huntington Beach usually means December through March.
Any one of these is worth a look. Two or more and you’re on borrowed time before the next rain. Call (844) 320-2945 and we’ll tell you straight whether it’s a repair or a bigger fix.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Roof repair in Huntington Beach, including edge-profile replacement and the flashing work around it, runs $400 – $1,800 installed. Tile roof repair, which is common on the older hillside homes, runs $600 – $2,500. If the failing edge has let water into the decking long enough that you’re looking at a larger roof replacement, that job runs $8,000 – $20,000, and metal roofing runs $15,000 – $40,000.
What drives the range: how much the failure spread, whether the decking underneath needs repair, the profile type, and how accessible the edge is (a two-story rake takes more setup than a single-story eave). We price parts and labor on a written line-item estimate before we start, and every change order is in writing before we touch the job. Every eligible job includes permits pulled and inspections signed. The work is backed by our 90-Day Done Right Promise. Call (844) 320-2945 for a free estimate.
DIY or Call Us?
Here’s the honest split. You can safely get on a stepladder from the ground and look: check the edge profile for lifting, look for rust, see whether water stains are showing near the eaves. You can also grab a tape measure and note your roof edge thickness and overhang so you know what profile you’re dealing with. That’s useful information and it won’t hurt you.
What we don’t recommend is climbing onto the roof to pry up or replace the profile yourself. Roof work at height is genuinely dangerous, especially on a pitch, and pulling an edge profile back exposes the underlayment and flashing beneath it. Get that wrong and you turn a $400 repair into a water-damage problem. That’s a job for someone trained and insured to be up there. We’re not going to pretend it’s a Saturday project. Call (844) 320-2945 and we’ll get a free estimate on the calendar.
FAQs

A quality aluminum profile on a well-installed roof lasts decades; a thin gauge or poorly fastened one can fail within a handful of years, and the salt air near the coast shortens that. The fastener and material grade matter more than the age. Call (844) 320-2945 and we’ll assess yours for free.
Often yes, if the failure is localized to a lifted section or a few fasteners, and that’s the $400 – $1,800 range. If the profile is corroded through or the underlayment beneath is compromised, replacement is the right call. We’ll tell you which one before you commit. Call (844) 320-2945 for a free second opinion on any written estimate you’ve already got.
A localized edge-profile repair is typically a single-day job. A larger section, or one that turns up decking repair underneath, runs longer, and we’ll tell you the timeline in the written estimate before we start. Call (844) 320-2945 to schedule your free estimate.
We match the profile to your roof edge dimensions and source genuine Schluter components or a true dimensional equivalent, whichever the spec calls for, and we confirm it before ordering. We’re an independent contractor, not affiliated with Schluter. Call (844) 320-2945 and we’ll walk you through it.
When that edge profile lets go, you’ve got a narrow window before the next rain does real damage. We’re proud to be the owner-operated, name-on-the-truck crew here in Huntington Beach, and we’ll give you a written estimate with parts and labor itemized, permits pulled, and a promise we stand behind. Call (844) 320-2945 for a free estimate, and a live person will pick up.
Written by the team at Barrett & Sons Construction Huntington Beach, serving Huntington Beach and nearby areas.












