







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Windows & Doors: The Huntington Beach Owner’s Guide
We install and repair Unilock windows and doors across Huntington Beach, and the work usually slots into our standard window and door pricing: window replacement runs $4,500 – $15,000 for a typical home, and impact-rated units land between $8,000 and $25,000. Single parts – a sash balance, a multipoint lock, a threshold, a hinge set – are quoted line by line once we see the label on your unit. Most owners find us the same way: the door stops latching cleanly in the last inch, or a window sash drifts down on its own and won’t hold where they leave it. That sag and that sticky latch are the two most common first signs, and both point to a worn part rather than a failed window.
Key Takeaways
- Unilock parts are matched by series and label, not by sight. The unit label decides what fits.
- Coastal salt air in Huntington Beach ages weatherstrip, rollers and lock hardware faster than inland homes.
- We install and repair; we don’t sell loose parts over the counter.
- Every job comes with permits pulled where eligible and our written 90-Day Done Right Promise.
Which Unilock Models This Applies To

Unilock has built several window and door lines over the years, and the parts are not interchangeable between them. A tilt-latch for a vinyl single-hung will not seat in a casement frame, and the multipoint lock on a patio door from one series won’t drop into the strike plate on another. Before we quote anything, we find the unit label. On Unilock windows it’s usually etched into the glass in a corner or stuck to the jamb inside the frame; on doors it’s often on the hinge edge or the top of the slab. That label gives us the series and the manufacture date, which is what lets us match the correct replacement.
If the label is gone, we measure instead: sash width and height, jamb depth, the distance between hinge screws, and the lock’s backset. Those four numbers usually narrow it to one or two part numbers. On the OEM-versus-aftermarket question, we’re straight with you: some Unilock parts are worth buying genuine, especially any lock or hinge that carries the unit’s security rating. Rollers, weatherstrip and sash balances often have solid aftermarket equivalents at a lower price, and we’ll tell you which is which before you decide. We don’t stock parts and we don’t carry them on a truck; we source the right one for your unit and bring it to the job.
We’re an independent contractor and not affiliated with Unilock. We work on their products the same way we work on the other premium brands we install – KraftMaid and Cambria in kitchens, Silestone counters, Andersen and Marvin windows and doors.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Windows & Doors Is Failing
Most failures show up as a small annoyance long before the part actually quits. Here’s what we see on Huntington Beach homes and what’s usually behind it.
- The door won’t latch without a shove. A worn strike plate or a sagging hinge is letting the slab drop a quarter inch, so the bolt misses the keeper. Left alone, it wears the lock face and the frame.
- The window sash slides down on its own. The sash balance has lost tension. A balance that’s failed won’t hold the weight, and forcing it can crack the sash or snap the cord.
- Drafts or a whistle along the edge. Weatherstrip has flattened or pulled loose, common within a few years on the coast where salt air and sun dry out the seal.
- The handle turns but the door won’t open. A multipoint lock with a broken gearbox or a misaligned shoot bolt. This one is a security issue, not just an annoyance – a door that won’t lock properly is a door that isn’t protecting the house.
- Rust or white crust on hinges, screws and rollers. Salt air in Huntington Beach eats plated hardware faster than the inland heat does. When you see the crust, the part is already past its prime.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

Here’s how the numbers break down for Huntington Beach homeowners. Parts-plus-labor on a single repair is quoted line by line so you can see exactly what the part costs and what the labor costs – no bundled mystery price.
| Job | Typical installed range |
|---|---|
| Single part repair (lock, hinge, balance, roller, weatherstrip) | Quoted line by line after we see the label |
| Window replacement | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
What drives the range: the number of units, the series, whether it’s impact-rated, and whether the opening needs any framing or trim work once the old unit comes out. Every scope, allowance and price change arrives as a written change order before any work happens, so the number you sign is the number you pay. Permits are pulled and inspections signed on every eligible job. Every completed job is backed by our written 90-Day Done Right Promise.
DIY or Call Us?
Some of this you can safely check yourself. Look for the unit label, measure the sash and jamb, and note whether the door is square by watching the gap along the top and hinge side. Cleaning and lubricating hinges and rollers is fine, and so is swapping weatherstrip if you can match the profile.
Where it goes wrong: sash balances and multipoint locks. A window balance is under real tension, and a released one can snap back and cut a hand or break the sash; a lock gearbox that’s forced out of alignment can leave the door unable to secure, which is worse than where you started. Those are jobs for someone who’s done them. If you’re not sure which part is bad, that’s exactly what the free estimate is for. Call (844) 320-2945 and we’ll take a look.
FAQs

The unit itself often lasts 20 to 30 years, but the moving parts – weatherstrip, rollers, hinges and lock hardware – typically need attention in 10 to 15. Coastal salt air and sun in Huntington Beach shorten that window, so parts wear faster here than a few miles inland.
Often, yes. A balance, hinge or lock can usually be swapped without replacing the whole unit, which keeps the cost down. If the frame or glass is failing, that’s when a full replacement makes more sense – we’ll tell you which you’re looking at before you spend a dime.
A single part repair is usually a short visit, often under an hour. A full window or door replacement depends on how many units and whether the opening needs framing work – we’ll give you the timeline in writing with the quote.
We match it to your unit’s series and label, or measure the frame if the label is gone, then source the correct part – genuine where it matters for security and fit, a quality equivalent where it doesn’t. You’ll see the part and the price on the written quote.
Ready to get it fixed the right way? Call Barrett & Sons Construction Huntington Beach at (844) 320-2945 for your free estimate. Live person answers around the clock, no trip charge inside the county, and a free second opinion on any written estimate you already have.
Written by the team at Barrett & Sons Construction Huntington Beach, serving Huntington Beach and nearby areas.












