







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Seal Beach, CA | Barrett & Sons Construction Huntington Beach
We provide independent Unilock service across Seal Beach, from Old Town cottages to the 1960s tract homes up by the naval station. The one thing that sets our Unilock work apart here: coastal zone permits and tight side-yard setbacks on Seal Beach infill lots shape paver driveways as much as the stone itself. We’re not affiliated with Unilock, but we work with their paving stones and retaining wall systems on a regular basis. Call (844) 320-2945 to set up a free estimate.
Why Seal Beach Residents Choose Us for Unilock Service

Barrett & Sons Construction Huntington Beach has worked with Unilock service and the full line of paving stones and wall systems long enough to know how each profile behaves in salt air. Brussels Block, Beacon Hill, Seneca, Yorkville – we’ve installed and repaired all of them, and we know which ones hold up on a west-facing driveway two blocks from the water and which ones pit and fade.
Our technicians have up to 28 years of experience, and the same crews who set your pavers pull the permits and stand behind the job with our 90-Day Done Right Promise. Calls get answered by a live person around the clock. Pricing comes in writing before any work starts, and every scope change arrives as a written change order, not a surprise on the final invoice.
Seal Beach is a small, walkable town. Neighbors watch. We stage on the alley side, notify the people next door, and keep the site clean because we’ll see these folks at the hardware store next month. More on the wider Seal Beach service area if you want the full picture of what we cover.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Solve in Seal Beach
Hardscape problems in Seal Beach tend to trace back to the marine environment and the age of the housing stock. These are the ones we see most:
- Efflorescence and salt bloom on Brussels Block. The marine-layer humidity that hangs over Seal Beach most mornings leaves a white mineral haze on paver faces. It’s not damage, but it needs periodic cleaning and sealing to keep the surface looking right.
- Joint sand erosion in driveways and patios. Coastal wind and winter rain wash joint sand out of the gaps, and once the sand goes, the pavers start to shift underfoot. Polymer joint sand slows this down, and we re-set the sand on a maintenance schedule for ocean-close installations.
- Color fading and pitting on older Seneca pavers. Years of UV and salt spray pit the surface, especially on west-facing patios and driveways. Some of it comes back with a good clean and seal; some of it means replacement with a denser series.
- Edge restraint failure on narrow driveways. Old Town lots have narrow setbacks, so pavers meet concrete or soil within a few feet of the property line. When the edge restraint gives out, the driveway spreads at the border, and that’s a repair we do a lot of in Seal Beach.
- Settling near the garage from shallow base compaction. Tight staging space on infill lots can force a crew to lay base in pieces, and shallow compaction catches up with you years later. We inspect the base before we touch the surface.
Unilock Service in Seal Beach: What Local Conditions Mean for Your Equipment
Here’s a fact that shapes almost every paver job in Seal Beach and doesn’t apply the same way a mile inland: in Old Town, narrow side-yard setbacks and coastal zone permits mean paver driveways often double as required permeable surfaces to satisfy runoff rules. That’s why Unilock‘s permeable paver options, Brussels Block included, get specified so often on lots near the beachfront blocks. It isn’t a style choice – it’s a compliance path. A driveway that sheds runoff onto a neighboring lot that sits close to the property line runs into stormwater review, and a permeable system with the right open-graded base solves it in one move. Layer that over marine-layer humidity that corrodes fasteners and flashes faster than inland, and the spec has to be right the first time. On a typical Old Town lot, a paver driveway installed years ago shows joint sand washout and slight settling near the garage, a common issue that comes from marine humidity and tight staging limiting proper base compaction. A qualified pro inspects the base, recompacts if it’s needed, replaces the lost sand with polymeric joint sand, and resets any shifted pavers, often recommending a permeable system for better drainage going forward.
Unilock Models & Products We Service in Seal Beach
We work with Brussels Block, Beacon Hill, Seneca, and Yorkville – the Unilock profiles that hold up in a salt-air climate when the base is right and the jointing is done properly. For repairs, we use Unilock’s OEM joint sand and edge restraints so the system stays intact. For full replacements, a high-quality aftermarket polymeric sand is often a better fit because it resists erosion from coastal wind and rain. We don’t stock Unilock parts locally; we source them per job once we’ve seen the site and know exactly what’s needed.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Seal Beach

Seal Beach paver work falls into a range set by lot size, base condition, and how much of the old system can stay. Here’s what our typical line items run:
| Service | Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
Coastal-zone permit review and the tighter staging on Old Town lots can push a job toward the upper end, because base prep takes longer when there’s nowhere to pile material. Our free estimate includes a look at the base, a written scope, and a line-item price. No surprises after the first dumpster drops. Call (844) 320-2945 for a paver estimate in Seal Beach.
Serving Seal Beach, CA – Our Local Coverage Area
We serve Seal Beach and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Seal Beach
Coastal humidity speeds up efflorescence and salt accumulation on Brussels Block and corrodes the metal edge restraints that hold the field in place. It also means joint sand needs more frequent topping than inland installations, though periodic cleaning and sealing keeps the surface in good shape. Call (844) 320-2945 if you want a look at your existing pavers.
Often, yes – especially where the driveway functions as permeable surface or where it sits in the coastal zone. Old Town lots commonly trigger stormwater and setback review because of the narrow side yards. We pull the permit and get the inspection signed on every eligible job, because the last contractor most homeowners used told them permits were optional. Call (844) 320-2945 and we’ll walk through what your lot needs.
Sometimes, if the concrete is sound and the height clearance at the garage apron works out. On old slabs that have settled or cracked, a fresh base is the safer call, and on a tight Seal Beach lot the extra height from an overlay can block the garage door. We inspect the slab first and tell you which path makes sense. Estimates are free – call (844) 320-2945.
Brussels Block with a permeable base system is the most common pick for Seal Beach beachfront lots, because the open-graded base handles runoff and the profile is dense enough to resist salt spray pitting better than some older pavers. Beacon Hill is a good choice for patios where the look matters and traffic is lighter. Call (844) 320-2945 for a recommendation on your specific site.
Every two to three years is typical for west-facing installations a few blocks from the water, and every three to four years further inland. Salt air and humidity wear sealant faster on ocean-close surfaces. Skipping it usually means efflorescence comes back and joint sand washes out faster. Call (844) 320-2945 to schedule a reseal or a look at what you have.
Service Areas Near Seal Beach
We cover Seal Beach and the neighboring towns, including Huntington Beach, Los Alamitos, and Rossmoor, plus Cypress, La Palma, and the surrounding stretch of coastal Orange County. If you’re on the border and not sure which town line you fall under, give us a call and we’ll sort it out.
Book Your Unilock Service in Seal Beach Today
Whether you’re re-setting a Brussels Block driveway in Old Town or planning a fresh permeable paver patio, we’ll come look at the site and give you a written estimate. We’re an independent Unilock provider, not affiliated with the manufacturer. Call (844) 320-2945 to get on the schedule.
Written by the team at Barrett & Sons Construction Huntington Beach.












