







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Huntington Beach Homeowners Choose CGI Construction
We provide independent CGI construction service in Huntington Beach, CA, specializing in CGI cabinetry and surfacing for kitchens and baths. What separates our CGI work from a generic install is that we treat the coastal environment as a design input, not an afterthought: hardware selection, finish spec, and anchoring get chosen for salt air and humidity before anything is ordered. We’re an independent provider and not affiliated with or authorized by CGI, so our recommendations come from hands-on experience, not a manufacturer script. Call (844) 320-2945 to schedule a free estimate.
Why Trust Barrett & Sons Construction Huntington Beach for Your CGI Construction?

Our crew members have worked with CGI’s framed, frameless, and full-access cabinet lines long enough to know how each one behaves after a few years in coastal Orange County. That matters with CGI because the hardware and finish carry the product, and both take a beating here. We know which hinge series loses dampening first, where painted MDF doors tend to fail around sinks and cooktops, and when a frameless box needs additional anchoring rather than another adjustment.
We keep CGI service warranty-safe: OEM-compatible parts where color and fit matter, and no drilling or modification that would give a manufacturer a reason to deny a claim. Every scope, allowance, and price change is written down before work starts. On every eligible job we pull permits and get inspections signed. And every completed job is backed by our written 90-Day Done Right Promise. Tom Barrett publishes his name, his address, and his license number. Look it up before you sign anything. A live person answers the phone 24 hours a day, seven days a week.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Fix in Huntington Beach
Huntington Beach sits on a high water table and marine clay, so the work here is often dewatering and foundation engineering before it’s anything else. In kitchens, that same moisture and salt air go after cabinets directly. These are the CGI problems we see most:
- Soft-close hinges and drawer glides that lose dampening or fail outright. Years of daily use in humid coastal air wear the dampeners in CGI’s soft-close hardware. Doors start slamming instead of easing shut, and drawers stop pulling smooth. The fix is usually hardware replacement, not new cabinets.
- Painted finishes chipping, cracking, or peeling on MDF and HDF doors. The doors closest to the sink and cooktop take moisture and heat all day. CGI’s painted maple and painted MDF fronts can blister at the edges when the seal breaks. It shows up first near the dishwasher vent and above the range.
- Frameless boxes separating at joints or sagging under load. CGI Euro Series frameless cabinets rely on solid anchoring. In the 1970s and ’80s two- and three-story stucco infill around Huntington Harbour, uneven or shallow walls let those boxes work loose. Heavy dishware stacks make it worse.
- Toe kicks and leg levelers cracking or going unstable. The 1950s-60s ranch tracts inland have shallow slabs and floors that were never perfectly level. When a leg leveler sits on a high spot, it takes the whole cabinet’s weight on one point and eventually cracks. Re-shimming and leveling solves most of it.
- Stripped hinge screw holes in the cabinet frame. Pulled loose over years of opening and closing, the original screws no longer bite. We reinforce the hinge plates and use proper anchors rather than jumping a size and splitting the stile.
In the low-lying neighborhoods around Huntington Harbour and the Bolsa Chica wetlands, we routinely hit the water table within a few feet on renovation work, so cabinet and countertop installs get planned around moisture control. The marine layer and onshore salt air also corrode fasteners and flashing fast, which is a materials-selection question on any CGI job here, not just a maintenance one.
CGI Parts & Our Repair-vs-Replace Approach

Parts get sourced per job. We don’t claim to stock CGI hardware locally; we order the right part for your specific model and finish. For color match and exact fit, OEM CGI hardware and touch-up kits are the safe call, especially on visible faces. For high-wear moving parts like drawer glides and hinges, quality aftermarket options such as Blum can match or beat OEM durability at lower cost, and we’ll tell you when that’s the honest choice.
We repair individual cabinets when the box and finish are sound. We recommend replacement only when several units show structural failure or the finish breakdown is widespread. A typical scenario: a homeowner notices drawers sticking and doors not closing flush after several years of use. Inspection often turns up worn CGI soft-close hinges and glides, sometimes with stripped screw holes in the frame. A qualified pro replaces the failed hardware with OEM or quality aftermarket parts, reinforces the hinge plates, and adjusts doors and drawers so everything runs smooth. That usually avoids replacing cabinets you don’t need to replace. Call (844) 320-2945 and we’ll look at it before anyone quotes a full replacement.
Our CGI Service Process – Step by Step
- 1
Diagnosis. We check the hardware, the door and box finish, the anchoring, and the floor under the toe kicks. We identify your exact CGI line so the replacement parts fit.
- 2
Repair or install. We swap hinges and glides, reinforce plates, re-shim levelers, and adjust. On new installs we set and anchor CGI boxes to coastal-appropriate standards, with allowance in writing for anything that changes.
- 3
Test. Every door and drawer gets opened and closed by hand, dampening checked, alignment confirmed.
- 4
Warranty. The finished work is covered by our written 90-Day Done Right Promise. If something’s off, one call brings us back.
CGI Products We Service & Install in Huntington Beach
We work with the full CGI cabinet family: Premier Series framed cabinets, Euro Series frameless cabinets, and Signature Series full-access cabinets, in maple and painted finishes. Around those cabinets we handle the work that goes with them: cabinet installation and refacing, full kitchen remodeling, and quartz and granite countertops. That means the doors, the boxes, and the top all get planned for how they’ll live together in your kitchen.
See the difference
Before
After
Before
After
Before
AfterWe Also Service These Brands
We’re multi-brand, not single-brand dependent. Alongside CGI, we work with KraftMaid cabinetry, Cambria and Silestone quartz, and Kohler fixtures. If your project mixes a CGI cabinet run with a Cambria top and Kohler sink, we spec and install it as one job. That keeps the fit and finish consistent from cabinet box to countertop edge.
What CGI Work Costs in Huntington Beach
Here’s what our CGI-related work typically runs in the Huntington Beach market. These are line-item ranges, not a phone quote that changes at the door. Every price change arrives as a written change order before any work moves.
| Service | Typical Range in Huntington Beach |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
FAQs – CGI Construction Service in Huntington Beach
No. We’re an independent CGI service provider and not affiliated with or authorized by CGI. We work with CGI products because we know them, not because the manufacturer endorses us. That independence keeps our advice honest. Call (844) 320-2945 for a free estimate.
Yes, for color match and exact fit we use OEM CGI hardware and touch-up kits, and for high-wear parts like glides and hinges we’ll recommend quality aftermarket options such as Blum when they hold up better for the price. We tell you which is which before ordering.
Hardware repairs and adjustments are often a single visit, while a full cabinet installation or kitchen remodel runs longer depending on scope and permitting. Coastal Zone projects can add time for a coastal development permit. Call (844) 320-2945 for a realistic timeline on your job.
We cover CGI Premier Series framed, Euro Series frameless, and Signature Series full-access cabinets, in maple and painted finishes. If you’re not sure which line you have, tell us what you see and we’ll sort it out.
No, when it’s done warranty-safe. We use compatible parts and avoid modifications that would void coverage, and our own written 90-Day Done Right Promise backs the work. Call (844) 320-2945 with your warranty details and we’ll work within them.
Cabinet installation typically runs $4,000 – $13,000, countertop installation $2,000 – $6,500, and a full kitchen remodel $14,000 – $45,000, though your exact number depends on scope and cabinet condition. Call (844) 320-2945 for an exact quote. Estimates are free.
Book Your CGI Service in Huntington Beach, CA

Whether it’s worn soft-close hardware, a failing painted finish, or a full CGI cabinet installation, we’ll give it a straight look and a written price. No trip charge inside the county, a free second opinion on any written estimate, and $40 off any repair over $200. Call (844) 320-2945 for your free estimate.
Written by the team at Barrett & Sons Construction Huntington Beach.












